Samsung HLN4365W, HLN567W, HLN617W, HLN507W N n e c t i o n s, Connecting VHF and UHF Antennas

BP68-00142A-2 5/27/03 10:09 AM Page 20

C o n n e c t i o n s

Connecting VHF and UHF Antennas

If you do not have a cable system, you will need to connect an antenna to your TV.

Antennas with 300-ohm Flat Twin Leads

If your antenna looks like this: it has 300-ohm flat twin leads.

Place the wires from the twin

1 leads under the screws on the

300-75 ohm adapter. Use a screwdriver to tighten the screws.

Plug the adapter into the

2 ANT-A terminal on the back panel of the TV.

Antennas with 75-ohm Round Leads

If your antenna looks like this: it is an antenna with 75-ohm round leads.

Plug the antenna lead into the

1 ANT-A terminal on the back panel of the TV.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting them to the TV. This requires a combiner attachment, which you can buy at an electronics store.

Connect both antenna

1 leads to the combiner.

Plug the combiner into the

2 ANT-A terminal on the back panel of the TV.

20 21

Downloaded from www.Manualslib.com manuals search engine