67
Special Features
66

Swapping the Contents of the PIP and Main image

1Press the Menu button. Move
the joystick down to select
PIP, then press the joystick to
enter. Quick way to access PIP
Swap: Just press “Swap” on
the remote control.
2Move the joystick down to
select “Swap”.
3Move the joystick to the right or
left.
The channel in the PIP image will
appear in the main image, and
vice versa.
4Press Menu to exit.
NOTE
• When ANT-B, Component mode, PC, or DVI is selected, the PIP Swap function doesn’t work.

Selecting a Signal Source (Antenna or Cable) for PIP

If the PIP source is TV during PIP ON, you can select the broadcasting source of PIP picture sepa-
rately from the main picture. (If the main picture is ANT-B and the broadcasting sources are differ-
ent, making adjustments is necessary.)
1Press the Menu button. Move
the joystick down to select
PIP, then press the joystick to
enter.
2Move the joystick down to
select “Air or CATV”.
3If an antenna is connected,
the setting is “AIR.” If a Cable
TV system is providing the sig-
nal, move the joystick to the
left or right until the appropri-
ate type of cable system is
displayed (“STD,” “HRC,” or
“IRC”).
4Press Menu to exit.

BP68-00142A-4 5/27/03 10:08 AM Page 66

Downloaded from www.Manualslib.com manuals search engine