5-16
3
Monitoring
●Event Monitoring
It is possible to set to Off/3sec/5sec/10sec/20sec/30sec/Continuous.
①Off : Event Monitoring does not operate to turn to the screen where an event occurs.
➁3sec/ 5sec/ 10sec/ 20sec/ 30sec : Sets the duration time of screen in the Auto Sequence
mode.
➂Continuous : The Event Monitoring screen remains alive until you press the “Alarm”
button in the front to cancel the screen manually.
●OSG Display
①Date :
The date is displayed on the screen when it is On, and not displayed when it is Off.
➁ Time :
The time is displayed on the screen when it is On, and not displayed when it is Off
.
➂Cam name : The Cam name is displayed on the screen when it is on, and not displayed
when it is off.
➃Status :
Audio/Ptz is displayed on the screen when it is on, and not displayed when it is off.
●Spot Out Channel
Spot Out channel is used to let one of two monitors monitor a channel, focusing on it.
Spot Out channel supplies two functions, continuous monitoring of only one channel and
Auto Sequence to display all the channels one by one.
①Auto Sequence setup ranges from Ch1 to Ch 4.
➁In the Auto Sequence mode, Spot Out channels are displayed in turn.
➂Duration time for Auto Sequence is as same as set for Camera setup.
●Spot Out Event Monitor
Sets if event monitoring will be executed for Spot Out channels.
①Off : The event monitoring dose not operate in the Spot Out channel.
➁3sec/ 5sec/ 10sec/ 20sec/ 30sec : Sets the duration time of screen in the Auto Sequence
mode.
➂Continuous : Once scrolled down, the screen remains displayed until you delete “Alarm”
LED in the front manually.
SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-16