Samsung SHR-4160N, SHR-4160P Transfer Protocol Settings

5-30
Note
Note
If you want to connect IPRouter with the main body of SHR-4160N/P, you shall
designate a port for SHR-4160N/Pin the IP Router setup menu.
The SHR-4160N/Pmain body uses 4 ports for TCP communication and further 160
UDPports when the procotol type is set to UDP. In addition, if you want to use the
DHCPfunction backed by IP Router to allocate Dynamic IP to the main body of
SHR-4160N/P, you shall designate a port for the IPwhich SHR-4160N/P has been
allocated by the IPRouter setup menu.
If you use IPRouter, you are recommended to rather determine IP and Port numbers to
be allocated to the main body of SHR-4160N/Pfrom the IP Router setup menu, set the
connection mode to Static IPfor the main body of SHR-4160N/P, and input the
determined IPand Port number in IP Router than use the DHCP function.
Please refer to the IPRouter User ’s Manual or call the manufacturer to set up IPRouter.
Transfer Protocol Settings
●You may choose the protocol type, either TCPor UDP.
ADSLsetup in the IP setup page can be made only to TCP.
●Port(TCP) can be selected from 554 to 998, increasing by 4.
Once the first digit is chosen, the rest 3 digits will follow the first digit.
●Port(UDP) can be selected from 8000 to 9760, increasing by 160.
Once the front port is chosen, the rest ports will change accordingly.
●Unicast/Multicast has the default of Unicast and you may choose Multicast.
● Multicast IP shall be set to Multicast from Multicast/Unicast to be activated and for IP
setup.
Sets up the D-Class IP address from 224.0.0.0 to 239.255.255.255.
●TTl shall be also set to Multicast from Multicast/Unicast to be activated and to
choose a value from 0-255. The default is 5.