Auto Adjustment
[MENU] ˧ [ / ] ˧ [ENTER] ˧ [ / ] ˧ [ENTER]
The values of Fine, Coarse, Position are adjusted automatically.
By changing the resolution in the control panel, the auto function is performed.
(Available in PC, BNC mode only)
[The direct button on the remote control is the 'AUTO' button.]
Signal Balance
This is used to make up for the weak RGB signal transmitted by a long signal cable.
(Available in PC, BNC mode only)
1) Signal Balance
[MENU] ˧ [ / ] ˧ [ENTER] ˧ [ / ] ˧ [ENTER] ˧ [ENTER] ˧ [ / ] ˧ [ENTER]
Selects either On or Off with the signal control.
2) Signal Control
[MENU] ˧ [ / ] ˧ [ENTER] ˧ [ / ] ˧ [ENTER] ˧ [ / ] ˧ [ENTER] ˧ [ / ] ˧ [ENTER] ˧
[ / ] ˧ [< / >] ˧ [ENTER]
A
djusts the R Phase, G Phase, B Phase, Gain and Sharpness manually.
Size
[MENU] ˧ [ / ] ˧ [ENTER] ˧ [ / ] ˧ [ENTER] ˧ [ / ] ˧ [ENTER]
The Size can be switched.
1) 16:9
2) 4:3
PIP Picture
[MENU] ˧ [ / ] ˧ [ENTER] ˧ [ / ] ˧ [ENTER] ˧ [ / ] ˧ [ENTER] ˧ [ / ] ˧ [ENTER] ˧ [ /
] ˧ [ENTER] ˧ [< / >] ˧ [ENTER]
Adjusts the PIP Screen Settings.
1) Contrast
A
djusts the Contrast of the PIP window on the screen.
2) Brightness
A
djusts the Brightness of the PIP window on the screen.
3) Sharpness
A
djusts the difference between the lightest and darkest areas of the PIP window.
4) Color
A
djusts the Color of the PIP window on the screen.
5) Tint
A
dds a natural tone to the PIP window.
Y
ou can view a picture from AV, S-Video through the PIP screen in PC, BNC and DVI (PC) mode.
Operates only if the video signal is NTSC.
Available Modes: PIP
Picture [ AV / S-Video / Component / DVI-Video Mode]
Available Modes
PC / BNC / DVI
AV
S-Video
Component
DVI-Video
Mode
[MENU] ˧ [ / ] ˧ [ENTER] ˧ [ENTER] ˧ [ / ] ˧ [ENTER]
The LCD monitor has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are
preset at the factory.
Dynamic, Standard, Movie, or Custom can be activated.
\\
W\UGGG[W\UGGG[ YWW^TXYTW]GGG㝘㤸G`aZ`aXZYWW^TXYTW]GGG㝘㤸G`aZ`aXZ