- The Screen Scroll function scrolls the screen for the specified period of time.
- This function is not available when the power is turned off.
1) Safety Scre en
[MENU] ˧ [୸ / ୹] ˧ [ENTER] ˧ [୸ / ୹] ˧ [ENTER] ˧ [ENTER] ˧ [୸ / ୹] ˧ [ENTER]
Determines whether to turn the Screen Scroll function Off or On.
-Of
f
-On
2) Interval
[MENU] ˧ [୸ / ୹] ˧ [ENTER] ˧ [୸ / ୹] ˧ [ENTER] ˧ [୸ / ୹]˧ [ENTER] ˧[୸ / ୹] ˧ [ENTER]
Determines the time interval to run the Screen Scroll operation. (1~10 Hour)
The time is calculated on the basis of the power on time.
By default, the time is set to 10 hours.
-1~10 Hou
r
3) Second
[MENU] ˧ [୸ / ୹] ˧ [ENTER] ˧ [୸ / ୹] ˧ [ENTER] ˧ [୸ / ୹]˧ [ENTER] ˧ [୸ / ୹] ˧ [ENTER]
Determines the time period to run the Screen Scroll operation. (1~5 Second)
By default, the time is set to 5 seconds.
-Type-Scroll : 1~5 Second
-Type-Pixel, Bar, Eraser : 10~50 Second
4) Type
[MENU] ˧ [୸ / ୹] ˧ [ENTER] ˧ [୸ / ୹] ˧ [ENTER] ˧ [୸ / ୹] ˧ [ENTER] ˧ [୸ / ୹] ˧ [ENTER]
You can change the Safety Screen Type.
-Scroll
-Pixel
-Bar
-Erase
r
Resolution Select
[MENU] ˧ [୸ / ୹] ˧ [ENTER] ˧ [୸ / ୹] ˧ [ENTER] ˧ [୸ / ୹]˧ [ENTER]
When the picture is not monitored properly on the screen when setting the graphics card resolution of the
computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768 @ 60Hz or 1366 x768 @ 60Hz, by using
this function(Resolution Select), you can have the picture monitored on the screen in the specified resolution.
(Available in PC/BNC mode only.)
1) Off
2) 1024 X 768
3) 1280 X 768
4) 1360 X 768
5) 1366 X 768
Note
• Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz, 1280 x 768
@ 60Hz, 1360 x 768 @ 60Hz or 1366 x768 @ 60Hz.
Lamp Control
[MENU] ˧ [୸ / ୹] ˧ [ENTER] ˧ [୸ / ୹] ˧ [ENTER] ˧ [ENTER] ˧ [< / >] ˧ [ENTER]
Adjusts the inverter lamp in order to reduce energy consumption.
Power On Adjustment
[MENU] ˧ [୸ / ୹] ˧ [ENTER] ˧ [୸ / ୹] ˧ [ENTER] ˧ [ENTER] ˧ [୸ / ୹]˧ [ENTER]
Adjusts the Power On time for the screen.
*Caution: Set the Power On time to be longer to avoid overvoltage.
Reset
The picture parameters are replaced with the factory default values.
1) Image Reset
[MENU] ˧ [୸ / ୹] ˧ [ENTER] ˧ [୸ / ୹] ˧ [ENTER] ˧ [ENTER] ˧ [< / >]˧ [ENTER]
(Available in PC/BNC mode only.)
2) Color Reset
]W
W\UGGG`W\UGGG` YWW^TXYTW]GGG㝘㤸G`aZ`aX\YWW^TXYTW]GGG㝘㤸G`aZ`aX\
[MENU] ˧ [୸ / ୹] ˧ [ENTER] ˧ [୸ / ୹] ˧ [ENTER] ˧ [୸ / ୹] ˧ [ENTER] ˧ [< / >]˧ [ENTER]