recording
ZOOMING IN AND OUT
Use the zoom function for
•You can zoom with the zoom lever or the Control (W/T) button on the LCD panel.
•Zoom magnifi cation over 10x is done through digital image processing, and is therefore called digital zoom. Digital zooming is possible up to 1200x. Set "Digital Zoom" to "On." ➥page 67
To zoom in
•Slide the Zoom lever towards T (telephoto).
(Or press the Control button () on the LCD panel.)
To zoom out
•Slide the Zoom lever towards W (wide-angle).
(Or press the Control button () on the LCD panel.)
OK
W:Recording wide area
T: Recording enlarged image (telephoto)
•The minimum possible distance between camcorder and subject while maintaining sharp focus is about 5cm (about 1.96 inch) for
•The focus changes when zooming after focussing manually.
Focus automatically or seize the desired scene by zooming before focussing manually. ➥page 62
•Optical zoom preserves image quality, but during digital zoom the image quality may suffer.
•Fast zooming or zooming in subject from afar may produce slow focussing. In this case, use "Manual Focus." ➥page 62
•It is recommended to use
•Frequent use of the zoom function consumes more power.
•The zooming speed of the zoom lever and zoom button are different.
Use appropriately at your preference. For faster zooming adjustment, use the zoom lever. For slower zooming adjustment, use the zoom buttons.
W:WideangleT:Telephoto
STBY 0:00:00 [245Min]