Juniper Networks M5, M10 manual Rear of Chassis, Chassis Physical Specifications

Figure 3: Rear of Chassis

Forwarding Engine	Routing Engine
Board	cover

Power supply A
Power supply B	ESD
	point	Fan tray

Chassis

1302

The chassis includes two electrostatic discharge (ESD) points (banana plug receptacles) for electrical safety, one front and one rear, as shown in Figure 1, Figure 2, and Figure 3.

Before removing or installing components of a functioning router, attach an ESD strap to an ESD point and place the other end of the strap around your bare wrist. Failure to use an ESD strap could result in damage to the router.

The router must be connected to earth ground during normal operation.

For further safety information, see “Safety and Regulatory Compliance

Information” on page 129.

Table 3 summarizes physical specifications for the router chassis.

Table 3: Chassis Physical Specifications

Description	Value
Chassis height	5.25 in. (13.3 cm)
Chassis width	17.5 in. (44.5 cm) for sides of chassis
	19 in. (48.3 cm) with mounting ears
Chassis depth	24 in. (61 cm)
Weight, maximum configuration	M5 router: 61 lb (27.6 kg)
	M10 router: 67 lb (29.5 kg)

Hardware Component Overview 7