Juniper Networks M5, M10 manual Replace an SFP, Remove an SFP

Replace Packet Forwarding Engine Components

Figure 32: Connect Fiber-Optic Cable to a PIC

PIC

PIC cable

1334

Replace an SFP

Small form factor pluggables (SFPs) are optical transceivers that can be removed from a PIC (for more information, see “Physical Interface Cards (PICs)” on page 9).

Figure 33: Small Form Factor Pluggable (SFP)

Connector

Locking pin

1855

SFPs are hot-insertable and hot-removable. Removing an SFP does not interrupt PIC functioning, but the removed SFP no longer receives or transmits data. To replace an SFP, perform the following procedures:

•

•

Remove an SFP on page 95

Install an SFP on page 96

Remove an SFP

To remove an SFP, follow this procedure (see Figure 33):

1.Place an electrostatic bag or antistatic mat on a flat, stable surface to receive the SFP. Have ready a rubber safety cap for the SFP transceiver and the cable.

Replace Hardware Components 95