Juniper Networks M5, M10 manual Unpack the Router, Tools Required

Chapter 6

Unpack the Router

This chapter explains how to unpack the router and verify the parts received. Before beginning, prepare the installation site as described in “Prepare for Router Installation” on page 37 and review the safety information in “Safety and Regulatory Compliance Information” on page 129, especially “General Safety Guidelines and Warnings” on page 131 and “Installation Safety Guidelines and Warnings” on page 146. This chapter discusses the following topics:

•

•

•

Tools Required on page 55

Unpack the Router on page 55

Choose Front or Center Mounting on page 57

Tools Required

To unpack the router and prepare for installation, you need the following tools:

•Utility knife for cutting the sealing tape on the shipping carton

•Phillips (+) screwdriver, to move the mounting brackets and install the support shelf if front-mounting the router

Unpack the Router

The router is shipped in a cardboard carton, held in place with foam packing material.

The crate also contains an accessory box, the front-mounting shelf, and the M5 and M10

Internet Router Installation Quick Start poster.

The router is maximally protected inside the shipping carton. Do not unpack it until you are ready to begin installation.

To unpack the router, perform these steps:

1.Move the shipping carton to a staging area as close to the installation site as possible.

Unpack the Router 55