Juniper Networks M10, M5 manual Replace Routing Engine Components, Remove and Insert the PC Card

Replace Routing Engine Components

Figure 39: Connect Power Cables to a DC Power Supply

Grounding point

Grounding lug

To ground

1331

Replace Routing Engine Components

For instructions on replacing Routing Engine components, see the following sections:

•

•

•

Remove and Insert the PC Card on page 112

Replace the Routing Engine on page 115

Replace Connectors to Routing Engine Interface Ports on page 118

Remove and Insert the PC Card

The slot labeled PC CARD on the Routing Engine faceplate accepts a Type I PC card, as defined in the PC Card Standard published by the Personal Computer Memory Card International Association (PCMCIA). The router is shipped with a PC card that contains JUNOS Internet software. You can also copy JUNOS software from the Routing Engine onto a PC card, for example, to create a backup copy of upgrade software that you have obtained from Juniper Networks. Instructions for copying software to a PC card are available at the Juniper Networks Customer Support Center Web site (http://www.juniper.net/support); after logging in, navigate to the download page for JUNOS Internet software.

112M5 and M10 Internet Routers Hardware Guide