Juniper Networks M5, M10 manual Commit the configuration to activate it on the router

Configure the JUNOS Internet Software

11.Optionally, display the configuration to verify that it is correct.

[edit] root@# show system {

host-name host-name; domain-name domain-name; backup-router address; root-authentication {

authentication-method (password public-key);

}

name-server { address;

}

}

interfaces { fxp0 {

unit 0 { family inet {

address address/prefix-length;

}

}

}

}

12. Commit the configuration to activate it on the router.

[edit]

root@# commit

13.Optionally, configure additional properties by adding the necessary configuration statements. Then commit the changes to activate them on the router.

[edit]

root@host# commit

14. When you have finished configuring the router, exit configuration mode.

[edit] root@host# exit root@host>

The commands in Steps 5 through 12 connect the router to the network but do not enable it to forward traffic. For complete information about the commands to issue in Step 13, including examples, see the JUNOS Internet software configuration guides.

Connect the Router and Perform Initial Configuration 71