To setup the camera
1 Click <SYSTEM> <CAMERA>.
You can select one from <Image Flip>, <Image>, <White Balance>,
<Exposure Mode>, <Adaptive Lighting Mode>,
<Power Line>, <Saturation> and <Detail>.
2 To complete the setting, click the [Apply] button.
<Image Flip>: Images can be flipped horizontally or vertically.
<Image>: Images can be set to color or black
<White Balance>: Color casts can be adjusted so that images in white can normally be seen at any color temperature.
<Auto>: The camera can automatically adjust the color temperature in real time according to changes in surroundings. The range of color temperature that can be adjusted is approx. 2000K – 8000K.
<Daylight>: A mode set to a color temperature of 6500K.
<Tungsten>: A mode set to a color temperature of 2800K.
<Office fluorescent>: A mode set to a color temperature of 4000K.
<Fluorescent>: A mode set to a color temperature of 4500K.
<Horizontal>: A mode set to a color temperature of 2000K.
<Exposure Mode>: The level of exposure can be adjusted by selecting Auto or Manual. (Settings: Auto, Manual (0,1,2,3,4))
<Auto>: Supports the optimum exposure level.
<Manual>: A desired exposure level (0 – 4) can be set according to surroundings.
<Adaptive Lighting Mode>: It can improve the lighting effect by increasing the intensity of the light. <Off>: A mode in which the backlight function is turned off.
<Normal>: A mode in which both the dark and bright areas are adjusted according to the surroundings.
<Backlit>: A mode in which the backlight adjustment function is enhanced.
<Power Line>: The power frequency can be set to 50 Hz or 60 Hz.
<Saturation>: The screen image can be adjusted to desired saturation. (Settings: 0,1,2,3,4,5,6,7,8,9)
<Detail>: Horizontal and vertical sharpness can be adjusted. (Settings: 0,1,2,3,4,5,6,7,8,9)
07 SETTING UP
Setting Up _49
