Samsung SNC-M300 user manual To reset the system, Click System  Reset

To reset the system

If the system abnormally operates or a problem occurs, you can restart or reset the system.

Click <SYSTEM>  <RESET>.

The Reset window appears.

<Restart>: The Reset window appears.

<Factory Default>: Initializes the system settings to the factory settings and then restarts the system.

-<Except Network Parameter>: Initializes the system settings except network settings.

-<All>: Initializes all the system settings. Selecting this option is the same as pressing the [FACTORY RESET] button on the rear panel of the main body.

After reset and restart, you have to connect to the system again.

It takes a few minutes until the system booting is completed.

You cannot connect to the system until the system booting is complete.

After running <Factory Default>  <All>, you have to run <IP Installer.exe> program and setup network settings such as IP address, Subnet mask, Gateway, etc., to connect to the Internet.

48_ Setting Up