Samsung SP4202 manual Viewing an External Signal Source

Viewing an External Signal Source

Use the remote control to switch between viewing signals from connected equipment, such as VCR, DVD, Set-Top Box and the TV source (broadcast or cable)

1Press the MENU ( ) button.

Result: The options available in the Input group are displayed.

2Press the ENTER ( ) button.

Result: The Source List is selected.

3Press the ENTER ( ) button again.

4Press the ▲ or ▼ button to select signal source, then press the ENTER ( ) button.

➢◆ When you connect equipment to the TV, you can choose between the following sets of jacks : Ext.1, Ext.2, Ext.3, or Component on the TV’s rear panel, and AV or S-Videoon the TV’s side panel.

◆You can select these options simply by pressing the SOURCE ( ) button.

5Press the MENU ( ) button.

Result: The options available in the Input group are displayed again.

6Press the ▲ or ▼ button until the Edit Name is selected. Press the ENTER ( ) button.

7Press the ▲ or ▼ button to select the external source to be edited. Press the ENTER ( ) button.

Result: The device names available are listed.

VCR - DVD - Cable STB - HD STB - Sat. STB -

AV Receiver - DVD Receiver - Game -

Camcorder - DVD Combo - DHR (DVD HDD

Recorder) - PC.

8Select the required device by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm.

➢If you change the external source while viewing, pictures might take a short period of time to be switched.

TVInput

Source List	:	TV	√
Edit Name			√

Move		Enter		Return
TV		Source List
	TV
	Ext.1	: - - - - - -
	Ext.2	: - - - - - -
	Ext.3	: - - - - - -
	AV	: - - - - - -
	▼ More
Move		Enter		Return
TV		Input
	Source List	:	TV	√
	Edit Name			√

Move		Enter	Return
TV		Edit Name
Ext.1	- - - - - -			√
		VCR
Ext.2		: - - - -DVD- - - -		√
		Cable STB
Ext.3		: - - -HD- -STB- - -		√
AV		Sat. STB
		: -AV- -Receiver- - - - -		√
		▼		√
S-Video	: - - - - - - - -
Component	: - - - - - - - -			√

Move Enter Return

English - 47