Programming the Remote Control for Other Components
VCR |
Your TV comes equipped with a universal remote control. In addition to controlling the TV, the universal remote control can also operate a VCR, Cable box, DVD, and
➢The remote control might not be compatible with all VCRs, DVD players and Cable boxes.
1Turn off your VCR (Cable box or DVD).
2Press the SELECT button to switch the remote control to the VCR (CATV or DVD) mode.
➢The remote control has five modes : TV, VCR, CATV, DVD and STB.
3Press the SET button.
4Enter 3 digits of the VCR (Cable box or DVD) code listed on the next page for your VCR (Cable box or DVD).
Example: To enter code “6”, press 0, 0, and 6. To enter code “76”, press 0, 7, and 6.
5Press the POWER (
) button. Your VCR (Cable box or DVD) should turn on. If it turns on, your remote control is now set correctly.
➢If it does not turn on, repeat the steps above, but try one of the other codes listed for your particular brand.
6Once your remote control is set up, press the SELECT button any time you want to use the remote control to operate the VCR (Cable box or DVD).
➢◆ When your remote control is in VCR, CATV, DVD or STB
mode, the volume buttons still control your television’s volume.
◆When your remote control is in TV mode, the VCR or DVD control buttons (rewind, stop, play/pause, and fast forword) still operate your VCR or DVD.
