Connect the [PC IN 1] terminal at the back of the projector to the D-Sub terminal of your PC using a D-Sub cable. Connect the [PC OUT] terminal of the projector to the D-Sub terminal of a monitor using a D-Sub cable.

-When connecting a monitor using the [PC OUT] function, make sure to connect your PC to the [PC IN 1] terminal.

-The monitor output which is connected to the [PC OUT] termininal will be normal even if you see a blank screen on your projector.

-The [PC OUT] function also operates in standby mode.

Connecting an HDMI-Compatible Device

First, check that the AV device and your projector are turned off.

Connect the [HDMI/DVI IN] terminal at the back of the projector to the HDMI or HDMI/DVI output terminal of the digital output device using an HDMI/DVI cable.

-When connecting to the HDMI output terminal of the digital output device, use an HDMI cable.

-For the supported input signals, refer to "AV Timing(HDMI)".

Connect the [PC 1/DVI AUDIO IN] terminal of the projector to the Audio out terminal of your digital output device using an audio cable (Not supplied).

- If connecting with an HDMI/HDMI cable, an audio cable (Not supplied) is not needed.

Connecting an AV device using a D-Sub cable