Samsung SRD-440 user manual Remote Devices, POS Devices, Item, and press Enter button

using the DVR

M <Check> status means that the HDD is operating but it has problems that require technical examination.

( ) appears on the Live screen.

<Replace> status means that the HDD has defect and requires immediate replacement.

( ) appears on the Live screen.

4.When the HDD Alarm setup is done, press <OK>.

Remote Devices

You can set the RS-485 communication for use of PTZ Camera and system keyboard with the DVR.

Using the mouse may help make setup easier.

1.	Use the up/down buttons (	) in <Device> window to
2.	move to <Remote Device>, and press [ENTER] button.
	Use direction buttons (	) to move to the desired
	item, and press [ENTER] button.

3.Set the values of each communication setup of the remote device.

•Baudrate : Baud rate settings of the DVR, PTZ camera and system keyboard should be matched for proper operations.

4.Specify the system keyboard and remote control ID, and click <OK>.

Remote Device
Baudrate		Parity		Data		Stop Bit		Transfer type
9600		None		8		1		Half Duplex
System Keyboard		OFF		ID	1
Remote Control		ON		ID	0
			OK		Cancel

M For changing the remote control’s ID, refer to “Changing the Remote Control ID”. (Page 11)

POS Devices

You can set properties of POS devices connected to the DVR.

A POS device connection requires channel, preset, and Port/Ethernet settings.

Using the mouse may help make setup easier.

1.	Use the up/down buttons (	) in <Device> window to
2.	move to <POS Device>, and press [ENTER] button.
	Use direction buttons (	) to move to a desired
	item, and set the value.

•POS USE : When selected <POS USE>, DVR and POS will be connected.

J If you change settings for the device and press <OK> while the <POS USE> is not checked, the changes for POS device will not be saved.

POS Device

POS USE

POS Device Setup

POS	CH	Preset 	Port/Ethernet
1	None	No preset	None
2	None	No preset	None
3	None	No preset	None
4	None	No preset	None

OK Cancel

42_ using the DVR