Samsung SRD-440 user manual Network Configuration, Connection Mode, Setting the Connection

5.When the backup setup is done, press <OK>.

If no available device is recognized for backup, <OK> button is not activated.

J The application may slow down during the backup.

You can switch to the menu screen during the backup in operation, but playback of data is not available.

If backup has failed, select “Device > Storage Device” and check the free space of the HDD and check also if the HDD is properly connected.

M Pressing the <Return> during the backup will return to the previous menu, while the backup progresses.

NETWORK CONFIGURATION

It provides networked monitoring of Live screen from a remote place, and supports mail forwarding function with events. You can configure the network environment which enables such functions.

Connection Mode

You can set the network connection route and protocol.

Setting the Connection

Sets the protocol and environment of the network.

Using the mouse may help make setup easier.

 USING THE DVR

1.Press the [MENU] button on the remote control.

2.Use the left/right button (◄ ►) to select <Network>. Network menu is selected.

3. Use the up/down buttons ( ) to move to <Connection Mode>, and press [ENTER] button.

Logout Return

Network

Connection Mode

DDNS

Live Transfer

Mailing Service

4.Select <Connection>.

A window of connection mode setup appears.

5. Use direction buttons (	) to move to a desired
item, and set the value.

•Connection Mode : Sets the network connection mode.

•Bandwidth : Sets the maximum data flow to be transferred. (Upload speed)

Options will vary depending on the selected connection mode.

-For <Static IP>, <Dynamic IP> : Select one from 50 kbps ~ 2Mbps, and Unlimited.

-For <ADSL>, select one from 50 kbps ~ 600 kbps.

Connection Mode
Connection	Protocol
 Connection Mode	Static IP
 Bandwidth	2Mbps
 IP	192.168. 1.200
 Gateway	192.168. 1.	1
 Subnet Mask	255.255.255. 0
 DNS	Manual	168.126. 63.	1
	OK	Cancel

English _53