Samsung SRD-440 user manual Updating the Software,  Using

•Updating the Software

1.Connect a device storing the software to be updated. (It may take about 10 seconds to recognize the device.)

Upgradeable devices include USB memory and network device.

To update the network, the current DVR should have been connected to the network.

Upgrade via the proxy server may not be enabled due to the restricted access.

2.Select <System Management> from <System> window.

3.Select <System Information>.

4.When the recognized device appears, select <Upgrade>.

System Management

System Information				Settings
	System Information
	 Software Version		v1.0xh_yymmddhhmmss

System Upgrade

MAC AddressCurrent Version 00:00:F0:54:FF:FFv1.0xh yymmddhhmmss

		New Version		v1.0xh_yymmddhhmmss
	S/W Upgrade		want to upgrade?
		Do you
 Device				USB2FlashStorage		Upgrade
				OK	Cancel
 Version				V1.08_090731170402

Previous

 USING

The <Upgrade> button will be activated only if the current <Software Version> of the <System Information> is same to or older than that of <S/W Upgrade>.

THE DVR

5.Press <OK> in the “System Upgrade” window.

While updating, it shows the progress.

•Updating progresses with 3 steps as shown in the figure.

System Management

System Information				Settings
	System Information
	 Software Version		v1.0xh_yymmddhhmmss

BroadcastS/W Upgrade

 MAC Address	00:00:F0:54:FF:FF
	Software upgrading...

S/W Upgrade
 Device	USB2FlashStorage	Upgrade
 Version	V1.08_090731170402

Previous

6.When the updating is done, it automatically restarts. Do not turn the power off until it finishes restarting.

M If “Upgrade Failed” appears, retry from the step 4.

When you experience continued failure, consult the service center for assistance.

When you perform S/W update remotely using Smart Viewer, it may take a max of 3 minutes to complete the update since Smart Viewer popped up a confirmation message. This is to guarantee that the DVR set operates stably. For a faster update, use the USB cable to connect to the DVR set.

System Management

System Information				Settings
	System Information
	 Software Version		v1.0xh_yymmddhhmmss

BroadcastS/W Upgrade

 MAC Address			00:00:F0:54:FF:FF
		Software upgradingSoftware...		upgrading...
	S/W Upgrade		Do not turn off during the upgrade.
 Device			USB2FlashStorage		Upgrade
 Version			V1.08_090731170402

Previous

English _35