Samsung SRP-770II user manual Samsung Label Printer Connecting the Power Supply, Ov—›–•PG

2. Samsung Label Printer

3. Connecting the Power Supply

CAUTIONS:

Feed Button

Cover Peel-off

Cover Open/Close

Printer Head

Paper Holder

Paper Guide

Paper(gap) Sensor

Peel-off Sensor

Power Connector

Status Indicator

Power Switch

Ov—›–•PG

Auto Cutter

Paper Adjuster

Dip Switch

When connecting or disconnecting the power supply from the printer, make sure that the power supply is not plugged into an electrical outlet. And the power supply’s rated voltage and your outlet’s voltage do not match, contact your dealer for assistance. Then do not plug in the power cord. Otherwise, you may damage the power supply or the printer.

1.Make sure that the printer’s power switch is turned off, and the power supply’s power cord is unplugged from the electrical outlet.

2.Check the label on the power supply to make sure that the voltage required by the power supply matches that of your electrical outlet.

3.Plug in the power supply’s cable as shown below. Notice that the flat side of the

plug faces down.

Interface Connectors [RS-232C, IEEE1284, USB]

ٻ ڑٻ ٻ ڒ