Samsung ST-54T6, ST-62T6 manual Connecting a VCR

I N S TA L L AT I O N

4

Connect a coaxial cable
between the ANTENNA
OUT terminal on the	Incoming
cable box and the B–IN	Cable
terminal on the A/B	Splitter
switch.

IN CABLE OUT

Cable Box

A

B

RF (A/B)

Switch

5
Connect another cable
between the other OUT
terminal on the splitter	IN CABLE OUT
and the A–IN terminal	Incoming
	Cable
on the RF (A/B) switch.	Splitter
	Cable Box

A

B

RF (A/B)

Switch

6

Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the VHF/UHF terminal on the rear of the TV.

Incoming

Cable

Splitter

		A
IN	CABLE OUT	B

	RF (A/B)
Cable Box	Switch

75

VHF/UHF

TV Rear

After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B,” you will need to tune your TV to the cable box’s output channel, which is usu- ally channel 3 or 4.)

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have not yet connected to an antenna or a cable system.

1

Unplug the cable or antenna from the back of the TV.

2

Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR.

VCR Rear Panel

	IN	AUDIO	VIDEO
		OUT	OUT
Incoming	ANTENNA L R
	OUT

Cable or

Antenna

2.4 CHAPTER TWO: INSTALLATION