Samsung ST42W5P manual Rear Panel Jacks, Antenna terminals ¨ Audio Input jacks, Video Input jack

Y O U R N E W T V

Rear Panel Jacks

Use the rear panel jacks to connect an A/V component that will be connected continu- ously, such as a VCR or a DVD player.

Because there are two sets of input jacks, you can connect two different A/V components (i.e., a VCR and a DVD, 2 VCRs, etc.)

For more information on connecting equipment, see pages 2.1 – 2.8.

Œ ANTENNA terminals ¨ AUDIO INPUT jacks

Two independent cables or antennas can be	Connect to the audio output jacks of VCRs, DVD
connected to these terminals. Use ANT-A and	players and similar devices.
ANT-B terminals to receive a signal from	ˆ S-VIDEO INPUT jack
VHF/UHF antennas or your cable system. Use
the ANT-A OUT terminal to send the signal being	Connect to an S-VHS VCR or DVD player.
received by the ANT-A terminal out to another	Ø COMPONENT 1(480i, 480p,
component (such as a Cable Set Top Box). The
PIP channel can be received only when a signal	1080i) AUDIO/VIDEO INPUT
source is connected to ANT-A.	jacks
´ AUDIO-VIDEO MONITOR	Connect a source that outputs 480i/480p/1080i
	Y,PB and PR signals, such as a DVD (or DTV Set-
OUTPUT jacks	Top Box.
Connect to the audio/video input jacks of a	∏ COMPONENT 2(480p, 1080i)
recording VCR.
Note: The monitor out does not operate in DVD	AUDIO/VIDEO INPUT jacks
or DTV mode.	Connect a source that outputs 480p/1080i Y, PB
	and PR signals, such as a DTV Set-Top Box.

ˇVIDEO INPUT jacks

Connect to the video output jacks of VCRs, DVD players and similar devices (Two sets are avail- able: Video1 and Video2).

CHAPTER ONE: YOUR NEW TV 1.4