Samsung ST42W5P Customizing Your Remote Control, Remote control has four, Turn off your VCR or

S P E C I A L F E AT U R E S

Customizing Your Remote Control

Your TV comes equipped with a “universal” remote control. In addition to controlling the TV, the universal remote can also operate most VCRs, DVDs and cable boxes (even if your VCR, cable box or DVD are made by manufacturers other than Samsung).

Setting Up Your Remote Control to Operate Your VCR (or DVD)

1

Turn off your VCR (or

DVD.)

2

Press the MODE button and make sure that the VCR (or DVD) LED is illuminated.

▼ The remote control has four

“modes”: “TV,” “VCR”, “Cable” and “DVD.” Press the “MODE” button to switch the remote control to the “VCR” (or DVD) mode.

3

On your Samsung remote control, press Set.

4

Enter 3 digits of the VCR (or DVD) code listed on page 4.22 for your brand of VCR (or DVD).

5

Press the Power button on the remote control. Your VCR (or DVD) should turn on. If your VCR (or DVD) turns on, your remote control is now set correctly.

6

Once your remote control is set up, press the MODE button any time you want to use the remote to operate your VCR (or DVD).

▼ Make sure you enter 3 digits of

the code, even if the first digit is a “0.”

If more than one code listed, try the first one.

▼ If your VCR (or DVD) does

not turn on, repeat steps 2, 3, and 4, but try one of the other codes listed for the brand of your partic- ular VCR (or DVD).

If no other codes are listed, try each code, 000 through 089.

▼ When your remote control is

in the “VCR” (or DVD) mode, the volume buttons still control your TV’s volume.

When your remote is in the “TV” mode, the VCR control buttons (PLAY, PAUSE, etc.) will still oper- ate your VCR.

CHAPTER FOUR: SPECIAL FEATURES 4.15