Belkin F5D5230-4 manual Setup your computers for networking

Step 3

STEP 3: Setup your computers for networking

For each computer, you connect to the Router you must make the correct network settings. Belkin has simplified this process by providing you with the Belkin SOHO Networking software to configure your computers. Follow the steps below to install this software on your computers.

Installing the Belkin SOHO Networking Software

1.Insert the CD-ROM that came with the Belkin 4-Port Cable/DSL Gateway Router into your CD-ROM drive of your computer connected to LAN Port-1.

2.Double-click on "My Computer" then double-click on your CD-ROM drive. Double-click on the icon called "Install" in the CD-ROM window.

3.Windows will install the software onto your PC. Follow the directions on the screen to complete the installation. After the Belkin SOHO Networking Software is installed, Windows may ask you to restart your computer. If so, please do so.

4.Repeat these steps for each computer you are connecting to your network.

5.Once you have installed the Belkin SOHO Networking Software on all of your computers, continue on to the next section.

Configuring Your Computers Using Belkin NetSetup

1.Once your computer has restarted, click "Start", "Programs", "Belkin SOHO Networking" then "Belkin NetSetup" to launch this easy-to-use computer configurator.

14