Product Descriptions

Front Panel

Power LED–When lit, this light indicates that the unit is receiving power

WAN Link Status

GREEN - indicates that there is an active connection with the Cable or DSL modem. If this light is off, the link is not established.

FLASHING GREEN – When the WAN link status light is flashing green, data is flowing between the Router and the Cable or DSL modem.

Port Activity/Status Lights

AMBER-Solid amber indicates that there is a 100Mbps (100Base-TX) link between the Router and the computer connected to that port.

GREEN-Solid green indicates that there is a 10Mbps (10Base-TX) link between the Router and the computer connected to that port.

FLASHING–When a port status light is flashing either amber or green, data is flowing between the Router and the computer connected to that port.

Rear Panel

Power Input Jack–Connect the DC power supply

WAN Port–Connect the network cable from the Cable or DSL modem to the WAN port

LAN Ports–Numbered 1 – 4. Connect the network cable from your PCs to these ports. Note: they do not need to be connected sequentially. For example, in a two-computer network you can connect one computer to Port 4 and another to Port 1.

Reset Button–If the Router stops functioning properly, you can power off and on the Router, without losing your settings. Press and hold the RESET button for 2 seconds. The power light will begin blinking and the port lights may blink. When the lights stop blinking, the Gateway Router has been reset.

4

Page 6
Image 6
Belkin F5D5230-4 manual WAN Link Status, Rear Panel