Step | Belkin F5D5230-4 manual

Step 2

4. Power on the Cable or DSL modem.

5. Connect the power adapter to the Router.

6.After the Cable or DSL modem and the Router are turned on, the Router’s WAN link light should be on. This indicates that the modem and the Belkin Gateway Router are connected together.

7.Turn on the rest of your computers and let them boot up. After your computers boot up, the LAN link lights on the front of the Router should be on for each port that a computer is attached to. Verify that your computers are connected by checking these lights.

Connection of your Belkin 4-Port Cable/DSL Gateway Router is now is complete. The next step is to set up each of your computers to be able to communicate with your Router.

13

Image 15

Belkin F5D5230-4 manual Step

Contents

Port Cable/DSL Gateway Router Table of Contents Built-in Dhcp Integrated 10/100 4-Port SwitchIntroduction NAT Firewall Security Package Contents Web-Based User InterfaceSystem Requirements Product Descriptions Rear Panel WAN Link Status Belkin Docking Options Belkin Docking RingWall Mounting the Belkin Gateway Router Is my IP address Static or Dynamic? Sharing Your Internet Connection Is Done In 4 Easy Steps Does my connection have an assigned host name? Does my Internet service provider use PPPoE?Step Is my connection bound to a MAC address? My IP Address is User Name Assigned by your ISP Password Service Name Step Write your IP Configuration settings here Connect Your Equipment Basic Parts Required for Each Computer on Your List NIC Step Setup your computers for networking Installing the Belkin Soho Networking SoftwareConfiguring Your Computers Using Belkin NetSetup Step Step Step Step Step Step Verify That Your Computers are Networked Step Accessing the Web-Based Setup Utility Configuring Your Router if Your Provider Uses Dynamic Step Step Step Step Configuring Your Router if Your Provider Uses PPPoE Step Click MAC Cloning/Entry. The following screen will appear DMZ Settings Intrusion Detection On/OffSecurity Log Virtual Server Settings Special Application Settings Client Filter Settings NAT Enable/Disable Services LAN Dhcp Settings Utilities Change PasswordSet Time Zone Remote Management Restore Defaults Reset Update Firmware Problem Possible Cause/Solution Troubleshooting Between the Gateway Router Make sure your computers Make sure the coaxial cable Glossary of Terms Glossary of Terms Port Cable/DSL Gateway Router F5D5230-4 Product Specifications CE Declaration of Conformity Warranty, FCC, CE Statement P73794