12.User Access Control Setting Using AP Manager
①“User Access Control” is function that shows permission of using AP to MAC ID Table of Wireless LAN Card installed on certain Stations among desktop or notebook PC, which are connected AP. If you want to use this function, select “User Access Control” on [Security] Dialogue Box.
“User Access Control” Setting
Deny
Pass
②The selections of [Other Stations] are common setting to decide whether deny or pass connection of Stations other than selected and managed by user.
③When you permit connection to selected AP, enter MAC ID of Wireless LAN Card on [Allowed Table]. Otherwise, enter MAC ID on [Denied Table]. All settings of the other MAC ID other than entered MAC IDs in each table are set by selecting “deny” or “pass” on [Other Stations] Box.
④When MAC ID is added on each table, use [+] icon. On the other hand, when deleted, use
⑤When you want to permit specific MAC ID and deny the other, select “deny” on [Other Stations] Box. Then, enter the MAC ID on [Allowed Table], which is you want to permit.
47
