WASHING PROCEDURE
TO WASH1.Before starting to wash, proceed as follows, Connect the water supply
hose and open the water tap.
•Lay the drain hose down toward
a sinkhole. (In case no drain pump)
•Place the drain hose in sink or bath. (In case no drain pump)
•Connect the power cord to the power supply outlet.
2. Set the WTER SELECTOR | Wash Spin |
| |
KNOB to the desired mode. | WATER SELECTOR |
3.Set the CYCLE SELECTOR KNOB to “WASH.RINSE”(in. case drain pump WASH)
1.Transfer the clothes into the spin basket and arrange the clothes evenly.
2.Be sure to replace the safety
cover and close the inner lid.
safty cover
3. Close the spin |
dryer lid. |
1. Set the CYCLE SELECTOR KNOB to
‘WASH.RINSE’. | Wash/Rinse |
| Wash | ||
(In the case of |
| Drain Rinse |
| Drain | |
|
| ||||
drain pump |
|
| |||
|
|
|
|
| |
‘WASH’) | CYCLE SELECTOR | CYCLE SELECTOR |
2.Supply the proper amount of water
so as not to delete one space overflow
the top of the washing tub. | 0 | ||
15 |
|
| 3 |
| |||
3. Set the WASH TIMER to | 6 | ||
12 | |||
2~3 minutes. | 9 |
WASH TIMER
4. Drain the water.
Set the delete one space cycle selector KNOB to ‘DRAIN’.
Wash/Rinse | Wash | ||
| Drain Rinse |
| Drain |
|
|
CYCLE SELECTOR | CYCLE SELECTOR |
4. Fill water in the wash tub |
and add the detergent. |
4. Set the SPIN DRY |
TIMER |
0
51
42
3
SPIN DRY TIMER
5.Repeat this cycle until drain water is clean. (2~3 cycles)
OVER FLOW RINSE5. Load laundry in the wash tub and fill water to proper water level.
6.Set the WASH TIMER
7.After washing, set the CYCLE SELECTOR KNOB
to 'DRAIN' for drain.
0
153
126
9
WASH TIMER
1. Keep supplying water(adjust water pressure to ensure that the amount of water supplied
does not exceed the amount of water drained.)
2.Set the WASH TIMER 6~8 minutes.
3. As soon as the
WASH TIMER shuts off, turn off the water tap.
4.Set the CYCLE SELECTOR KNOB to ‘DRAIN’.
Wash
Drain
CYCLE SELECTOR
0
153
126
9
WASH TIMER
0
153
126
9
WASH TIMER
3