MEPS − Televisions

April 2005

1 Introduction

1.1Background

In November 2004 the Energy Efficiency and Conservation Authority commissioned Wise Analysis Ltd to provide a review of the document “Minimum Energy Performance Standards Televisions”1 which was prepared for the Australian Greenhouse Office by Energy Consult Pty Ltd. In particular this report was to “provide a New Zealand perspective to the differences between the two countries with respect to:

markets, including a quantitative discussion compatible with the section entitles “Market Profile”

available technologies

economic implications (especially costs, and energy savings).”

As background to the Australian report, the Australian National Appliance and Equipment Energy Efficiency Committee (NAEEEC) had tracked over three years the energy usage in particular standby power consumption of appliances sold in retail outlets across Australia. NAEEEC also had an intrusive survey of standby consumption in households, and had a telephone survey done of 800 households to determine appliance ownership and usage. This meaningful research data became the backbone of the Australian Government’s standby policy development.

Leading on from this research, in 2002 the Australian Ministerial Council on Energy in 2002 released a policy document Money Isn’t all You’re Saving2 outlining Australia’s Standby Power Strategy 2002 – 2012. The strategy outlined the products and appliances that required “immediate” or “subsequent” action in the standby power program, among which were televisions3. Further research for NAEEEC4 suggested that a program that examined all modes of use including on-mode and not just standby modes, might better meet the Australian government’s efficiency goals. A report was thus commissioned to consider a range of policy options, including mandatory measures like appliance energy rating labelling and Minimum Energy Performance Standards (MEPS), to achieve that outcome. The report also investigated the potential for energy and greenhouse savings through the use of a combination of policy tools.

Much of the data in the Australian report, for example on power measurements could not be independently verified, and has been taken as given. In addition the depth of demographic information obtainable in New Zealand was also limited compared with Australia. However the key to the study is not so much the starting data as the assumptions made as to future growth of the stock of televisions, and it’s make up and changes to efficiency. The assumptions made in this report are given later in 9.1.

A general comparison of the two countries is given in the following table:

1Minimum Energy Performance Standards: Televisions, NAEEEP Report 2004/11 (prepared for prepared for the Australian Greenhouse Office

2Money Isn’t All You’re Saving, Australia’s Standby Power Strategy 2002-2012, MCE

3Where ever the term “televisions” appears in this report without further descriptive information, the term covers all television types, including digital, wide screen, plasma, rear projection, CRT, etc.

4Sustainable Solutions A Study of Home Entertainment Equipment Operational Energy Use Issues. NAEEEC 2003

Page 6

A study produced for the Energy Efficiency and Conservation Authority by

Wise Analysis Ltd

Page 9
Image 9
Samsung Televisions manual Introduction