Manuals / Nilfisk-ALTO / Household Appliance / Vacuum Cleaner

Nilfisk-ALTO RS 1300 Lifted Hopper Support ROD Installation, Using the HIGH-PRESSURE Water GUN

Models: RS 1300

1 224
Download 224 pages 52.13 Kb
Page 149
Image 149

USER MANUAL

ENGLISH

LIFTED HOPPER SUPPORT ROD INSTALLATION

Before working under the lifted hopper (1, Fig. F), it is necessary to install the support rods (3) according to the following procedure.

WARNING!

For safety purposes, before working under the lifted hopper, it is necessary to install the support rods (3, Fig. F). This procedure is necessary even if the hopper lifting cylinders are equipped with parachute valves that prevent the hopper from lowering accidentally in case of break/leakage from a pipe/fitting on the hydraulic system.

Support rod installation

1.Lift the hopper (6, Fig. G) completely according to the procedure shown in the relevant paragraph.

2.Disengage the two rods (2, Fig. F) from the fasteners (4) and bring them in the position (3), by inserting their ends in the housings (20).

3.Lower the hopper slightly to lean it on the rods.

Support rod removal

4.Lift the hopper slightly to remove it from the rods.

5.Disengage the two rods (3, Fig. F) from the housings (20) and bring them in the position (2), then engage and secure them with the fasteners (4).

6.Lower the hopper (6, Fig. G) completely according to the procedure shown in the relevant paragraph.

LIFTED HOPPER LID SUPPORT ROD INSTALLATION

Before working under the lifted hopper lid (44, Fig. G), it is necessary to install the support rod (17, Fig. F) according to the following procedure.

Support rod installation

1.Remove the rod (17, Fig. F) from the housing and lift the lid as necessary, then install the rod in the housing (18).

Support rod removal

2.Perform the procedures described in step 1 in the reverse order.

USING THE HIGH-PRESSURE WATER GUN (*)

(*)Optional for some countries.

The machine is equipped with a high-pressure water system (optional) to be used for washing the machine or other purposes.

WARNING!

Do not run the high pressure pump when the water tanks are empty or low (the pump can be damaged).

The following procedure refers to the high-pressure water gun use.

1.Pick up the high-pressure water gun (9, Fig. E) inside the cab.

2.Withdraw part of the hose (21, Fig. F) and connect the gun (9, Fig. E) to the quick coupling (22, Fig. F).

3.Start the diesel engine at idle speed, as shown in the relevant paragraph.

4.Turn on the high-pressure pump with the lever (8, Fig. E).

5.If necessary, bleed the air from the system by turning the water gun knob completely counter-clockwise and by pressing the water gun lever until the water comes out constantly and at low pressure.

Release the water gun lever and turn the knob clockwise to use the high pressure nozzle.

6.Run the engine at the desired speed.

7.Use the water gun by pressing the relevant trigger.

WARNING!

Protect body parts (eyes, hair, hands, etc.) properly, when performing cleaning procedures using compressed air or water gun.

WARNING!

Do not run the high pressure pump for long periods without using the water gun.

8.After using the water gun, perform steps from 1 to 5 in the reverse order.

RS 1300

33014091(3)2008-02 A

27

Page 148 Page 150
Page 149
Image 149
Nilfisk-ALTO RS 1300 manuel dutilisation Lifted Hopper Support ROD Installation, Lifted Hopper LID Support ROD Installation
Page 148 Page 150

RS 1300 specifications

Nilfisk-ALTO RS 1300 is a leading pressure washer renowned for its powerful performance and versatile applications. Designed for both commercial and residential use, this model caters to a wide range of cleaning needs, including patios, driveways, vehicles, and garden furniture.

One of the standout features of the RS 1300 is its robust motor, which delivers an impressive pressure of up to 130 bar. This high pressure allows users to tackle stubborn dirt and grime with ease. Coupled with a flow rate of up to 500 liters per hour, the machine ensures efficient cleaning in a shorter time frame.

The RS 1300 is equipped with a highly durable aluminum pump system that not only enhances the lifespan of the unit but also ensures consistent performance during heavy-duty cleaning tasks. The innovative design includes an adjustable pressure nozzle, which offers flexibility for various cleaning applications. Users can easily switch between different spray settings, allowing for tailored cleaning experiences.

In addition to its powerful performance, the Nilfisk-ALTO RS 1300 features a built-in detergent tank, making it convenient to use cleaning agents for enhanced results. This integration simplifies the cleaning process, as users can apply soap directly through the spray gun, boosting efficiency when dealing with tough stains.

Safety and ease of use are paramount in the design of the RS 1300. The machine comes with a safety lock feature to prevent accidental starts, providing peace of mind during storage and transport. Its ergonomic design ensures a comfortable grip, reducing user fatigue during prolonged use.

The RS 1300 is easy to transport, thanks to its lightweight design and integrated wheels. Users can effortlessly maneuver the unit around their property or job site. Additionally, storage is made simple with practical onboard storage solutions for the hose and accessories.

Overall, the Nilfisk-ALTO RS 1300 stands out for its combination of power, convenience, and user-friendly features. With its advanced technology and robust construction, it is a reliable choice for anyone seeking a high-performance pressure washer to tackle their cleaning challenges effectively. Whether for professional or home use, the RS 1300 is designed to meet the rigorous demands of various cleaning applications.