ENGLISH

USER MANUAL

USE

WARNING!

On some points of the machine there are some adhesive plates indicating:

−DANGER

−WARNING

−CAUTION

−CONSULTATION

While reading this Manual, the operator must pay particular attention to the symbols shown.

Do not cover these plates for any reason and immediately replace them if they are damaged.

GENERAL CAUTIONS

This machine is designed as a high performance, high capacity sweeper that can clean in tight and congested areas. By design this means a narrow wheel base with tight steering capability.

These design requirements can under certain conditions create instability during machine operation.

Instability can be caused by a combination of machine travel speed, abrupt maneuvering, operation on an incline, low tyre pressure, weight in the hopper and or raised hopper.

For this reason the machine must be driven by a qualified operator who must be properly instructed on how to use it and be aware of the potential risks.

The following are situations known to cause instability in the machine and care should be taken by the operator to assure safe operation:

–Lifting the hopper on an incline

–Maneuvering the machine with the hopper lifted

–Abrupt steering

–Maneuvering with speed, on a slope and/or with weight in the hopper

–Low tyre pressure

Inside the cab there is a decal (19, Fig. E) that warns the operator of the risk of instability and provides information on activities to avoid to prevent machine instability (see picture).

BEFORE START-UP

1.If necessary, open the right upper lid (28, Fig. G) by releasing the fasteners (29) with the supplied key, and refuel the machine through the filler neck (10, Fig. F).

CAUTION!

Do not fill the fuel tank to the top, but leave at least 1.6 in (4 cm) from the filler neck to allow the fuel to expand.

2.Check the dust control system water level through the indicator (42, Fig. F). If necessary, supply water according to the following procedure:

•Disengage the fasteners (10, Fig. G) with the supplied key, then open the left lid (9).

•Pour the water in the tanks through the plug (30, Fig. F), or the hose (29).

•Close the plug (30), or roll up the hose (29) and place it back in its housing.

•Close the lid (9, Fig. G) and secure it with the fasteners (10) by using the supplied key.

3.Check that there are no open lids/hoods and that the machine is in normal operating conditions.

18

33014091(3)2008-02 A

RS 1300

Page 139 Page 141
Page 140
Image 140
Nilfisk-ALTO RS 1300 manuel dutilisation Use, General Cautions, Before START-UP
Page 139 Page 141

RS 1300 specifications

Nilfisk-ALTO RS 1300 is a leading pressure washer renowned for its powerful performance and versatile applications. Designed for both commercial and residential use, this model caters to a wide range of cleaning needs, including patios, driveways, vehicles, and garden furniture.

One of the standout features of the RS 1300 is its robust motor, which delivers an impressive pressure of up to 130 bar. This high pressure allows users to tackle stubborn dirt and grime with ease. Coupled with a flow rate of up to 500 liters per hour, the machine ensures efficient cleaning in a shorter time frame.

The RS 1300 is equipped with a highly durable aluminum pump system that not only enhances the lifespan of the unit but also ensures consistent performance during heavy-duty cleaning tasks. The innovative design includes an adjustable pressure nozzle, which offers flexibility for various cleaning applications. Users can easily switch between different spray settings, allowing for tailored cleaning experiences.

In addition to its powerful performance, the Nilfisk-ALTO RS 1300 features a built-in detergent tank, making it convenient to use cleaning agents for enhanced results. This integration simplifies the cleaning process, as users can apply soap directly through the spray gun, boosting efficiency when dealing with tough stains.

Safety and ease of use are paramount in the design of the RS 1300. The machine comes with a safety lock feature to prevent accidental starts, providing peace of mind during storage and transport. Its ergonomic design ensures a comfortable grip, reducing user fatigue during prolonged use.

The RS 1300 is easy to transport, thanks to its lightweight design and integrated wheels. Users can effortlessly maneuver the unit around their property or job site. Additionally, storage is made simple with practical onboard storage solutions for the hose and accessories.

Overall, the Nilfisk-ALTO RS 1300 stands out for its combination of power, convenience, and user-friendly features. With its advanced technology and robust construction, it is a reliable choice for anyone seeking a high-performance pressure washer to tackle their cleaning challenges effectively. Whether for professional or home use, the RS 1300 is designed to meet the rigorous demands of various cleaning applications.
Top Page Image Contents