ENGLISH

USER MANUAL

30.Turn on the dust control system water pump with the switch (27, Fig. D) according to the following procedure:

•When the switch is turned to the first position, the nozzles sprinkle a medium quantity of water (use it when there is little dust)

•When the switch is turned to the second position, the nozzles sprinkle the maximum quantity of water (use it when there is a lot of dust)

31.Disengage the parking brake with the lever (13, Fig. E).

32.Start sweeping, by keeping the hands on the steering wheel (28, Fig. D) and gradually pressing the pedal (26), on the front side to move forward and on the rear side to move backward.

The drive speed can be adjusted from zero to maximum speed by increasing the pressure on the pedal.

While working, the machine picks up both light materials such as dust, paper, leaves, etc. and heavy materials such as stones, bottles, etc.

NOTE

All brooms (19, 20, 21, Fig. G) can be lifted or lowered when the machine is moving.

The brooms rotate even when they are lifted.

WARNING!

Do not leave the sweeper stationary with the suction inlet lowered and the brooms rotating.

Stopping the machine in working mode

33.To stop the machine release the pedal (26, Fig. D).

To stop the machine quickly, press also the brake pedal (31, Fig. D).

34.Engage the parking brake with the lever (13, Fig. E).

35.Turn off the dust control system water pump with the switch (27, Fig. D).

36.If open, close the dust control system taps (10, 11, 12, Fig. E).

37.Lift the 3rd broom by pushing the joystick (46, Fig. D) rearward.

38.Lift the suction inlet and side brooms by pressing the push-button (38, Fig. D).

39.Turn off the suction fan with the switch (30, Fig. D).

40.Turn the engine throttle lever (16, Fig. E) to idle, and hold it in this position for a few minutes to let the system stabilize.

41.Check that the hopper (6, Fig. G) is lowered and that the warning light (3, Fig. D) is off.

42.If necessary, bring the 3rd broom from opened position to closed position according to the following procedure:

•With the spring-return switch (34, Fig. D), check that the 3rd broom arm extension (22, Fig. G) is to the right end of stroke. Otherwise bring it to the above-mentioned position by pressing and holding the switch (34, Fig. D).

•Shift the 3rd broom arm (23, Fig. G) from opened position to closed position by pushing the joystick (46, Fig. D) to the left. The shifting operation will stop automatically when the end of stroke is reached.

WARNING!

It is possible to shift to the left or to the right the 3rd broom arm (23, Fig. G) safely, only when the arm extension

(22) is to the left or right end of stroke.

In this situation the arm shifting is limited by proper safety devices. Otherwise, an excessive shifting can damage the machine or affect its stability.

It is therefore advisable to bring always the 3rd broom arm extension (22, Fig. G) to the left or right end of stroke.

WARNING!

It is possible to bring the 3rd broom arm (23, Fig. G) to closed position, only when the arm extension (22) is to the right end of stroke.

43.Stop the 3rd broom and side broom rotation with the switch (29, Fig. D).

44.Turn off the engine, by turning the ignition key (24, Fig. D) counterclockwise, to the end of stroke, then remove it.

45.The headlights must be turned off.

46.Get out of the machine and bring the 3rd broom safety pin from the position (2, Fig. H) (disengaged) to the position (1) (engaged), by pulling and turning the relevant lever.

22

33014091(3)2008-02 A

RS 1300

Page 143 Page 145
Page 144
Image 144
Nilfisk-ALTO RS 1300 manuel dutilisation Stopping the machine in working mode
Page 143 Page 145

RS 1300 specifications

Nilfisk-ALTO RS 1300 is a leading pressure washer renowned for its powerful performance and versatile applications. Designed for both commercial and residential use, this model caters to a wide range of cleaning needs, including patios, driveways, vehicles, and garden furniture.

One of the standout features of the RS 1300 is its robust motor, which delivers an impressive pressure of up to 130 bar. This high pressure allows users to tackle stubborn dirt and grime with ease. Coupled with a flow rate of up to 500 liters per hour, the machine ensures efficient cleaning in a shorter time frame.

The RS 1300 is equipped with a highly durable aluminum pump system that not only enhances the lifespan of the unit but also ensures consistent performance during heavy-duty cleaning tasks. The innovative design includes an adjustable pressure nozzle, which offers flexibility for various cleaning applications. Users can easily switch between different spray settings, allowing for tailored cleaning experiences.

In addition to its powerful performance, the Nilfisk-ALTO RS 1300 features a built-in detergent tank, making it convenient to use cleaning agents for enhanced results. This integration simplifies the cleaning process, as users can apply soap directly through the spray gun, boosting efficiency when dealing with tough stains.

Safety and ease of use are paramount in the design of the RS 1300. The machine comes with a safety lock feature to prevent accidental starts, providing peace of mind during storage and transport. Its ergonomic design ensures a comfortable grip, reducing user fatigue during prolonged use.

The RS 1300 is easy to transport, thanks to its lightweight design and integrated wheels. Users can effortlessly maneuver the unit around their property or job site. Additionally, storage is made simple with practical onboard storage solutions for the hose and accessories.

Overall, the Nilfisk-ALTO RS 1300 stands out for its combination of power, convenience, and user-friendly features. With its advanced technology and robust construction, it is a reliable choice for anyone seeking a high-performance pressure washer to tackle their cleaning challenges effectively. Whether for professional or home use, the RS 1300 is designed to meet the rigorous demands of various cleaning applications.
Top Page Image Contents