ENGLISH

USER MANUAL

USING THE CAMERA KIT (optional)

1.To turn on the video system (1, Fig. AX) and the cameras (4 and 5), press the switch (2) when the ignition key (24, Fig. D) is inserted.

2.When the reverse gear is engaged, the video system and cameras turn on automatically.

3.For the functions of other switches on the right side of the display, refer to the camera kit Manual.

AFTER USING THE MACHINE

After working, before leaving the machine, perform the following operations.

1.Engage the parking brake with the lever (13, Fig. E).

2.Turn off the dust control system water pump with the switch (27, Fig. D).

3.If open, close the dust control system taps (10, 11, 12, Fig. E).

4.Lift the 3rd broom by pushing the joystick (46, Fig. D) rearward.

5.Lift the suction inlet and side brooms by pressing the push-button (38, Fig. D).

6.Turn the engine throttle lever (16, Fig. E) to idle, and hold it in this position for a few minutes to let the system stabilize.

7.Check that the hopper (6, Fig. G) is lowered and that the warning light (3, Fig. D) is off.

8.If necessary, bring the 3rd broom from opened position to closed position according to the following procedure:

•With the spring-return switch (34, Fig. D), check that the 3rd broom arm extension (22, Fig. G) is to the right end of stroke. Otherwise bring it to the above-mentioned position by pressing and holding the switch (34, Fig. D).

•Shift the 3rd broom arm (23, Fig. G) from opened position to closed position by pushing the joystick (46, Fig. D) to the left. The shifting operation will stop automatically when the end of stroke is reached.

WARNING!

It is possible to shift to the left or to the right the 3rd broom arm (23, Fig. G) safely, only when the arm extension (22) is to the left or right end of stroke.

In this situation the arm shifting is limited by proper safety devices. Otherwise, an excessive shifting can damage the machine or affect its stability.

It is therefore advisable to bring always the 3rd broom arm extension (22, Fig. G) to the left or right end of stroke.

WARNING!

It is possible to bring the 3rd broom arm (23, Fig. G) to closed position, only when the arm extension (22) is to the right end of stroke.

9.Stop the 3rd broom and side broom rotation with the switch (29, Fig. D). When the brooms turn off, the suction fan turns off automatically.

10.Clean the hopper, the filters and the suction pipe, check the gaskets and lubricate the suction fan bearings, as shown in the Maintenance chapter.

11.Turn off the engine, by turning the ignition key (24, Fig. D) counterclockwise, to the end of stroke, then remove it.

12.The headlights must be turned off.

13.Get out of the machine and bring the 3rd broom safety pin from the position (2, Fig. H) (disengaged) to the position (1) (engaged), by pulling and turning the relevant lever.

DUST CONTROL SYSTEM WATER TANK EMPTYING

When necessary, empty the dust control system water tanks according to the following procedure.

1.Engage the parking brake (13, Fig. E).

2.Turn off the engine, by turning the ignition key (24, Fig. D) counterclockwise, to the end of stroke, then remove it.

3.Operating over the right side of the rear axle, unscrew the water filter cover (1, Fig. Z) and remove it together with the filter.

4.Drain all the water from the tanks.

5.Install the cover (1, Fig. Z) and the filter.

28

33014091(3)2008-02 A

RS 1300

Page 149 Page 151
Page 150
Image 150
Nilfisk-ALTO RS 1300 manuel dutilisation After Using the Machine, Dust Control System Water Tank Emptying
Page 149 Page 151

RS 1300 specifications

Nilfisk-ALTO RS 1300 is a leading pressure washer renowned for its powerful performance and versatile applications. Designed for both commercial and residential use, this model caters to a wide range of cleaning needs, including patios, driveways, vehicles, and garden furniture.

One of the standout features of the RS 1300 is its robust motor, which delivers an impressive pressure of up to 130 bar. This high pressure allows users to tackle stubborn dirt and grime with ease. Coupled with a flow rate of up to 500 liters per hour, the machine ensures efficient cleaning in a shorter time frame.

The RS 1300 is equipped with a highly durable aluminum pump system that not only enhances the lifespan of the unit but also ensures consistent performance during heavy-duty cleaning tasks. The innovative design includes an adjustable pressure nozzle, which offers flexibility for various cleaning applications. Users can easily switch between different spray settings, allowing for tailored cleaning experiences.

In addition to its powerful performance, the Nilfisk-ALTO RS 1300 features a built-in detergent tank, making it convenient to use cleaning agents for enhanced results. This integration simplifies the cleaning process, as users can apply soap directly through the spray gun, boosting efficiency when dealing with tough stains.

Safety and ease of use are paramount in the design of the RS 1300. The machine comes with a safety lock feature to prevent accidental starts, providing peace of mind during storage and transport. Its ergonomic design ensures a comfortable grip, reducing user fatigue during prolonged use.

The RS 1300 is easy to transport, thanks to its lightweight design and integrated wheels. Users can effortlessly maneuver the unit around their property or job site. Additionally, storage is made simple with practical onboard storage solutions for the hose and accessories.

Overall, the Nilfisk-ALTO RS 1300 stands out for its combination of power, convenience, and user-friendly features. With its advanced technology and robust construction, it is a reliable choice for anyone seeking a high-performance pressure washer to tackle their cleaning challenges effectively. Whether for professional or home use, the RS 1300 is designed to meet the rigorous demands of various cleaning applications.
Top Page Image Contents