Snow brush assembly, Snow brush disassembly

USER MANUAL

ENGLISH

SNOW BRUSH ASSEMBLY AND USE (optional)

CAUTION!

To install this equipment, the sweeper should be equipped with the appropriate ﬁtting.

Snow brush assembly

1.Disassemble the suction inlet (17, Fig. G) (see the procedure in the relevant paragraph).

2.Disassemble the 3rd broom arm (23, Fig. G) (see the procedure in the relevant paragraph).

3.Operating on a level ground, bring the sweeper into a suitable position to install the snow brush (Fig. AV).

4.Turn off the engine and engage the parking brake (13, Fig. E).

5.Place the snow brush on the arms (19, Fig. AV) and secure it with the screws (14).

6.On both sides of the machine, tighten the brush height adjusting screws (15 and 16, Fig. AV) on the arms (19). If necessary, this adjustment can be performed afterwards, to adjust the lifted snow brush.

7.Lift the adjustable feet (5, Fig. AV) completely and secure it with the knobs (6).

8.Remove the protection cover, then connect the hydraulic system quick couplings (1, Fig. AV) to the corresponding pipe couplings (2).

9.Open the left side upper and lower lids (9 and 11, Fig. G) by disengaging the fasteners (10 and 12) with the supplied key.

10.If present, turn the lever (21, Fig. AV) from the position (21a) (high-pressure water gun activation) to the position (21b) (snow brush activation).

NOTE

The lever (21, Fig. AV) is present only if the machine is equipped with high-pressure washing system (see 21 and 22, Fig. F).

11.Close the left side upper and lower lids (11 and 9, Fig. G) by engaging the fasteners (10 and 12) with the supplied key.

12.Now the machine is ready to operate with the snow brush.

Snow brush disassembly

13.Disassemble the snow brush in the reverse order of assembly.

14.Secure and protect the snow brush properly.

Snow brush use

15.Assemble the snow brush (Fig. AV) according to the procedure shown in the relevant paragraphs.

16.To lift/lower the snow brush use the suction inlet lifting/lowering controls.

17.Turn on the snow brush with the switch (30, Fig. D).

18.To change the snow brush speed according to engine speed, use the knob (22, Fig. AV).

19.Before using the snow brush (10, Fig. AV), check its height from the ground according to the following procedure.

•Drive the machine with the snow brush on a level ground.

•Keep the machine stationary, lower the snow brush completely and let it rotate for few seconds.

•Stop and lift the snow brush, then move the machine aside and engage the parking brake.

•Check that the brush print (20, Fig. AV), along its length, is 0.8 to 1.6 in (2 to 4 cm) wide.

If the print is not within the speciﬁcations, remove the pins (13, Fig. AV) and adjust by lifting/lowering the wheels (11) with the winches (12).

When the adjustment is completed, place the winches (12) in the original position and install the pins (13).

20.Engage the parking brake with the lever (13, Fig. E).

21.Lift the snow brush, then turn off the engine by turning the ignition key (24, Fig. D) counterclockwise, to the end of stroke, then remove it.

22.Remove the clip (9, Fig. AV) and disconnect the rod (17) from the pin (8).

23.Tilt the brush assembly as necessary, then connect the hole (18, Fig. AV) to the relevant pin (8). Reinstall the clip (9).

24.Now the machine is ready to operate with the snow brush.

If necessary, ﬁt snow chains on the front wheels of the sweeper.

RS 1300

33014091(3)2008-02 A

RS 1300 specifications

Nilfisk-ALTO RS 1300 is a leading pressure washer renowned for its powerful performance and versatile applications. Designed for both commercial and residential use, this model caters to a wide range of cleaning needs, including patios, driveways, vehicles, and garden furniture.

One of the standout features of the RS 1300 is its robust motor, which delivers an impressive pressure of up to 130 bar. This high pressure allows users to tackle stubborn dirt and grime with ease. Coupled with a flow rate of up to 500 liters per hour, the machine ensures efficient cleaning in a shorter time frame.

The RS 1300 is equipped with a highly durable aluminum pump system that not only enhances the lifespan of the unit but also ensures consistent performance during heavy-duty cleaning tasks. The innovative design includes an adjustable pressure nozzle, which offers flexibility for various cleaning applications. Users can easily switch between different spray settings, allowing for tailored cleaning experiences.

In addition to its powerful performance, the Nilfisk-ALTO RS 1300 features a built-in detergent tank, making it convenient to use cleaning agents for enhanced results. This integration simplifies the cleaning process, as users can apply soap directly through the spray gun, boosting efficiency when dealing with tough stains.

Safety and ease of use are paramount in the design of the RS 1300. The machine comes with a safety lock feature to prevent accidental starts, providing peace of mind during storage and transport. Its ergonomic design ensures a comfortable grip, reducing user fatigue during prolonged use.

The RS 1300 is easy to transport, thanks to its lightweight design and integrated wheels. Users can effortlessly maneuver the unit around their property or job site. Additionally, storage is made simple with practical onboard storage solutions for the hose and accessories.

Overall, the Nilfisk-ALTO RS 1300 stands out for its combination of power, convenience, and user-friendly features. With its advanced technology and robust construction, it is a reliable choice for anyone seeking a high-performance pressure washer to tackle their cleaning challenges effectively. Whether for professional or home use, the RS 1300 is designed to meet the rigorous demands of various cleaning applications.

Nilfisk-ALTO RS 1300 Snow brush assembly, Snow brush disassembly, Snow brush use

Models: RS 1300