ENGLISH

USER MANUAL

DUST CONTROL SYSTEM NOZZLE AND FILTER CLEANING

WARNING!

Protect body parts (eyes, hair, hands, etc.) properly, when performing cleaning procedures using compressed air or water gun.

Preliminary operations

1.Engage the parking brake (13, Fig. E).

2.Turn off the engine, by turning the ignition key (24, Fig. D) counterclockwise, to the end of stroke, then remove it.

Cleaning of nozzles and filters on side brooms

3.Unscrew the ring nuts (1, Fig. V).

4.Remove and clean the nozzles (2, Fig. V) and filters (3) with compressed air. Remove calcium deposits. If necessary, replace the filters (3).

5.Install the filters and nozzles, and secure them with the ring nuts.

Cleaning of nozzles and filters in the suction inlet

6.Remove the clip (1, Fig. I), then remove the suction inlet skirt (3) by withdrawing it from the hinges (4).

7.With a 0.55 in (14 mm) socket wrench (1, Fig. W), unscrew the nozzles (2) and remove the filters (3) on both sides of the suction pipe (check the actual position of the nozzles).

8.Clean the nozzles (2, Fig. W) and filters (3) with compressed air. Remove calcium deposits. If necessary, replace the filters (3).

9.Install the filters and nozzles in the reverse order of removal.

Cleaning of nozzles and filters in the suction pipe, from suction inlet to hopper

10.Empty the hopper (6, Fig. G); if it contains a small quantity of waste, it is not necessary to dump it.

11.Drive the machine on a solid and level ground, then engage the parking brake (13, Fig. E).

12.Lift the hopper (6, Fig. G), according to the procedure shown in the relevant paragraph.

13.Turn off the engine, by turning the ignition key (24, Fig. D) counterclockwise, to the end of stroke, then remove it.

14.To avoid that the hopper lowers by accident, install the lifted hopper support rods (3, Fig. F), according to the instructions shown on the relevant paragraph.

15.Operating inside the suction pipe (6, Fig. F), with a 0.55 in (14 mm) socket wrench, unscrew the nozzle (1, Fig. X) and remove the filter (2) (check the actual position of the nozzle).

16.Clean the nozzle (1, Fig. X) and filter (2) with compressed air. Remove calcium deposits. If necessary, replace the filter (2).

17.Install the filter and nozzle in the reverse order of removal.

18.Remove the lifted hopper support rods (3, Fig. F) and lower the hopper (6, Fig. G) (see the procedure in the relevant paragraphs).

Cleaning of nozzle and filter in the rear suction pipe (optional)

19.Loosen the clamp (1, Fig. Y) and separate the rigid part of the rear suction pipe (2) from the hose (3).

20.Operating inside the pipe (2, Fig. Y), with a 0.55 in (14 mm) socket wrench, unscrew the nozzle (4) and remove the filter (5) (check the actual position of the nozzle).

21.Clean the nozzle (4, Fig. Y) and filter (5) with compressed air. Remove calcium deposits. If necessary, replace the filter (5).

22.Install the filter and nozzle in the reverse order of removal.

23.Install the hose (3, Fig. Y) on the rigid part of the rear suction pipe (2) and secure with the clamp (1).

36

33014091(3)2008-02 A

RS 1300

Page 157 Page 159
Page 158
Image 158
Nilfisk-ALTO RS 1300 Dust Control System Nozzle and Filter Cleaning, Cleaning of nozzles and filters on side brooms
Page 157 Page 159

RS 1300 specifications

Nilfisk-ALTO RS 1300 is a leading pressure washer renowned for its powerful performance and versatile applications. Designed for both commercial and residential use, this model caters to a wide range of cleaning needs, including patios, driveways, vehicles, and garden furniture.

One of the standout features of the RS 1300 is its robust motor, which delivers an impressive pressure of up to 130 bar. This high pressure allows users to tackle stubborn dirt and grime with ease. Coupled with a flow rate of up to 500 liters per hour, the machine ensures efficient cleaning in a shorter time frame.

The RS 1300 is equipped with a highly durable aluminum pump system that not only enhances the lifespan of the unit but also ensures consistent performance during heavy-duty cleaning tasks. The innovative design includes an adjustable pressure nozzle, which offers flexibility for various cleaning applications. Users can easily switch between different spray settings, allowing for tailored cleaning experiences.

In addition to its powerful performance, the Nilfisk-ALTO RS 1300 features a built-in detergent tank, making it convenient to use cleaning agents for enhanced results. This integration simplifies the cleaning process, as users can apply soap directly through the spray gun, boosting efficiency when dealing with tough stains.

Safety and ease of use are paramount in the design of the RS 1300. The machine comes with a safety lock feature to prevent accidental starts, providing peace of mind during storage and transport. Its ergonomic design ensures a comfortable grip, reducing user fatigue during prolonged use.

The RS 1300 is easy to transport, thanks to its lightweight design and integrated wheels. Users can effortlessly maneuver the unit around their property or job site. Additionally, storage is made simple with practical onboard storage solutions for the hose and accessories.

Overall, the Nilfisk-ALTO RS 1300 stands out for its combination of power, convenience, and user-friendly features. With its advanced technology and robust construction, it is a reliable choice for anyone seeking a high-performance pressure washer to tackle their cleaning challenges effectively. Whether for professional or home use, the RS 1300 is designed to meet the rigorous demands of various cleaning applications.
Top Page Image Contents