Manuals / Nilfisk-ALTO / Household Appliance / Vacuum Cleaner

Nilfisk-ALTO RS 1300 Battery Fluid Level Check, Brake Fluid Level Check, Tyre Pressure Check

Models: RS 1300

1 224
Download 224 pages 52.13 Kb
Page 160
Image 160

ENGLISH

USER MANUAL

BATTERY FLUID LEVEL CHECK

WARNING!

Protect body parts (eyes, hair, hands, etc.) properly, when performing battery check and cleaning procedures.

1.Engage the parking brake (13, Fig. E).

2.Turn off the engine, by turning the ignition key (24, Fig. D) counterclockwise, to the end of stroke, then remove it.

3.Open the left side upper and lower lids (9 and 11, Fig. G) by disengaging the fasteners (10 and 12) with the supplied key.

4.Check the electrolyte level in the battery (34, Fig. F) and, if necessary, top up with distilled water.

5.If necessary, clean the battery.

6.Check the battery terminal connections for oxidation.

7.Close the left side upper and lower lids (11 and 9, Fig. G) by engaging the fasteners (10 and 12) with the supplied key.

BRAKE FLUID LEVEL CHECK

1.Engage the parking brake (13, Fig. E).

2.Turn the ignition key (24, Fig. D) to OFF position and remove it.

3.Check the brake system fluid level in the tank (1, Fig. AB). The level must be at 0.4 in (1 cm) from the tank filler neck. If necessary, top up using the same type of fluid that is in the line.

Type of fluid used: DOT4.

REVERSE GEAR BUZZER SENSOR CHECK

1.Check that, when the machine moves in reverse, the relevant buzzer sounds.

If necessary, perform the adjustment according to the instructions in the Service Manual.

TYRE PRESSURE CHECK

1.Engage the parking brake (13, Fig. E).

2.Turn off the engine, by turning the ignition key (24, Fig. D) counterclockwise, to the end of stroke, then remove it.

3.The tyre pressure should be as follows:

•

Front tyres:

72.5 psi (5.0 Bar)

•

Rear tyres:

72.5 psi (5.0 Bar)

SUCTION INLET AND SKIRT HEIGHT AND OPERATION CHECK

Preliminary operations

1.Engage the parking brake (13, Fig. E).

2.Lift the suction inlet (17, Fig. G) according to the procedure shown in the relevant paragraph.

3.Turn off the engine, by turning the ignition key (24, Fig. D) counterclockwise, to the end of stroke, then remove it.

Suction inlet wheel check

4.Check that the three wheels (1, Fig. AC) of the suction inlet are in good conditions and turn freely (they must not be bent/ misshapen because of bumps or excessive pressure, etc.). Check also that the rubber thickness (2) is not lower than some millimetre.

If necessary replace the wheels (1) (see the procedure in the Service Manual).

Sliding panel check

5.Check that the main sliding panel (3, Fig. AC) and the front sliding panels (4) and (5) are in good conditions and that their thickness (6) is not lower than 0.2 in (5 mm), otherwise replace them (see the procedure in the Service Manual).

It is important to replace the sliding panels (3), (4), (5) when they are not completely worn, to avoid damaging the relevant mounting screws and making them difficult to remove.

Replace the sliding panels (3), (4), (5) as a unit, to avoid steps in the union areas (7), caused by different levels of wear.

38

33014091(3)2008-02 A

RS 1300

Page 159 Page 161
Page 160
Image 160
Nilfisk-ALTO RS 1300 Battery Fluid Level Check, Brake Fluid Level Check, Reverse Gear Buzzer Sensor Check
Page 159 Page 161

RS 1300 specifications

Nilfisk-ALTO RS 1300 is a leading pressure washer renowned for its powerful performance and versatile applications. Designed for both commercial and residential use, this model caters to a wide range of cleaning needs, including patios, driveways, vehicles, and garden furniture.

One of the standout features of the RS 1300 is its robust motor, which delivers an impressive pressure of up to 130 bar. This high pressure allows users to tackle stubborn dirt and grime with ease. Coupled with a flow rate of up to 500 liters per hour, the machine ensures efficient cleaning in a shorter time frame.

The RS 1300 is equipped with a highly durable aluminum pump system that not only enhances the lifespan of the unit but also ensures consistent performance during heavy-duty cleaning tasks. The innovative design includes an adjustable pressure nozzle, which offers flexibility for various cleaning applications. Users can easily switch between different spray settings, allowing for tailored cleaning experiences.

In addition to its powerful performance, the Nilfisk-ALTO RS 1300 features a built-in detergent tank, making it convenient to use cleaning agents for enhanced results. This integration simplifies the cleaning process, as users can apply soap directly through the spray gun, boosting efficiency when dealing with tough stains.

Safety and ease of use are paramount in the design of the RS 1300. The machine comes with a safety lock feature to prevent accidental starts, providing peace of mind during storage and transport. Its ergonomic design ensures a comfortable grip, reducing user fatigue during prolonged use.

The RS 1300 is easy to transport, thanks to its lightweight design and integrated wheels. Users can effortlessly maneuver the unit around their property or job site. Additionally, storage is made simple with practical onboard storage solutions for the hose and accessories.

Overall, the Nilfisk-ALTO RS 1300 stands out for its combination of power, convenience, and user-friendly features. With its advanced technology and robust construction, it is a reliable choice for anyone seeking a high-performance pressure washer to tackle their cleaning challenges effectively. Whether for professional or home use, the RS 1300 is designed to meet the rigorous demands of various cleaning applications.