USER MANUAL

ENGLISH

BROOM REPLACEMENT

NOTE

Brooms of various hardness are available. This procedure is applicable to all types of brooms.

CAUTION!

It is advisable to use protective gloves when replacing the side brooms because there can be sharp debris between the bristles.

1.Lift the brooms and engage the parking brake (13, Fig. E).

2.Turn off the engine, by turning the ignition key (24, Fig. D) counterclockwise, to the end of stroke, then remove it.

3.Remove the lower centre screw (1, Fig. AJ), then remove the broom (2) to be replaced. Recover the key.

4.Remove the screws (3, Fig. AJ) and the flange (4) from the removed broom.

5.Install the flange (4, Fig. AJ) and secure it with the screws (3) on the new broom.

6.Install the new broom (2, Fig. AJ) with the key, then tighten the centre screw (1).

7.Adjust the height of the new broom according to the procedure shown in the relevant paragraph.

PARKING BRAKE CHECK

Check

1.Engage the parking brake lever (13, Fig. E) and check for proper operation. Check also that the brake operates in the same way on both the front wheels.

If necessary, adjust the parking brake according to the instructions in the Service Manual.

ENGINE OIL LEVEL CHECK

1.Engage the parking brake (13, Fig. E).

2.Turn off the engine, by turning the ignition key (24, Fig. D) counterclockwise, to the end of stroke, then remove it.

3.Open the left side upper and lower lids (9 and 11, Fig. G) by disengaging the fasteners (10 and 12) with the supplied key.

4.Check the oil level as shown in the diesel engine Manual.

5.Close the left side upper and lower lids (11 and 9, Fig. G) by engaging the fasteners (10 and 12) with the supplied key.

ENGINE OIL CHANGE

1.Empty the hopper (6, Fig. G); if it contains a small quantity of waste, it is not necessary to dump it.

2.Drive the machine on a solid and level ground, then engage the parking brake (13, Fig. E).

3.Lift the hopper (6, Fig. G), according to the procedure shown in the relevant paragraph.

4.Turn off the engine, by turning the ignition key (24, Fig. D) counterclockwise, to the end of stroke, then remove it.

5.To avoid that the hopper lowers by accident, install the lifted hopper support rods (3, Fig. F), according to the instructions shown on the relevant paragraph.

6.Close the left and right side upper lids (9 and 28, Fig. G) by engaging the fasteners (10) and (29) with the supplied key.

7.Remove the screws, then remove the engine compartment panel (11, Fig. F).

8.Open the left side lower lid (11, Fig. G) by disengaging the fastener (12) with the supplied key.

9.Change the oil as shown in the diesel engine Manual.

10.Perform steps 3 to 8 in the reverse order.

ENGINE OIL FILTER REPLACEMENT

NOTE

This procedure must be performed when the engine oil has been drained.

1.Empty the hopper (6, Fig. G); if it contains a small quantity of waste, it is not necessary to dump it.

2.Drive the machine on a solid and level ground, then engage the parking brake (13, Fig. E).

3.Lift the hopper (6, Fig. G), according to the procedure shown in the relevant paragraph.

4.Turn off the engine, by turning the ignition key (24, Fig. D) counterclockwise, to the end of stroke, then remove it.

5.To avoid that the hopper lowers by accident, install the lifted hopper support rods (3, Fig. F), according to the instructions shown on the relevant paragraph.

6.Close the left and right side upper lids (9 and 28, Fig. G) by engaging the fasteners (10) and (29) with the supplied key.

7.Remove the screws, then remove the engine compartment panel (11, Fig. F).

8.Open the left side upper and lower lids (9 and 11, Fig. G) by disengaging the fasteners (10 and 12) with the supplied key.

9.If necessary, remove the battery (34, Fig. F).

10.Replace the oil filter as shown in the Diesel Engine Manual.

11.Perform steps 3 to 8 in the reverse order.

RS 1300

33014091(3)2008-02 A

41

Page 162 Page 164
Page 163
Image 163
Nilfisk-ALTO RS 1300 manuel dutilisation Broom Replacement, Parking Brake Check, Engine OIL Level Check, Engine OIL Change
Page 162 Page 164

RS 1300 specifications

Nilfisk-ALTO RS 1300 is a leading pressure washer renowned for its powerful performance and versatile applications. Designed for both commercial and residential use, this model caters to a wide range of cleaning needs, including patios, driveways, vehicles, and garden furniture.

One of the standout features of the RS 1300 is its robust motor, which delivers an impressive pressure of up to 130 bar. This high pressure allows users to tackle stubborn dirt and grime with ease. Coupled with a flow rate of up to 500 liters per hour, the machine ensures efficient cleaning in a shorter time frame.

The RS 1300 is equipped with a highly durable aluminum pump system that not only enhances the lifespan of the unit but also ensures consistent performance during heavy-duty cleaning tasks. The innovative design includes an adjustable pressure nozzle, which offers flexibility for various cleaning applications. Users can easily switch between different spray settings, allowing for tailored cleaning experiences.

In addition to its powerful performance, the Nilfisk-ALTO RS 1300 features a built-in detergent tank, making it convenient to use cleaning agents for enhanced results. This integration simplifies the cleaning process, as users can apply soap directly through the spray gun, boosting efficiency when dealing with tough stains.

Safety and ease of use are paramount in the design of the RS 1300. The machine comes with a safety lock feature to prevent accidental starts, providing peace of mind during storage and transport. Its ergonomic design ensures a comfortable grip, reducing user fatigue during prolonged use.

The RS 1300 is easy to transport, thanks to its lightweight design and integrated wheels. Users can effortlessly maneuver the unit around their property or job site. Additionally, storage is made simple with practical onboard storage solutions for the hose and accessories.

Overall, the Nilfisk-ALTO RS 1300 stands out for its combination of power, convenience, and user-friendly features. With its advanced technology and robust construction, it is a reliable choice for anyone seeking a high-performance pressure washer to tackle their cleaning challenges effectively. Whether for professional or home use, the RS 1300 is designed to meet the rigorous demands of various cleaning applications.
Top Page Image Contents