ENGLISH

USER MANUAL

Side broom forward tilting angle (5, Fig. AF) adjustment

6.On both sides of the machine, loosen the locknuts (6 and 7, Fig. AF), then adjust the forward tilting angle (5) by placing a lever in the hole (9) and turning the tie rod (8).

When the adjustment is completed, tighten the locknuts (6) and (7).

7.Perform step 1 again.

Side broom side tilting angle (10, Fig. AF) adjustment

8.On both sides of the machine, loosen the screws (11 and 12, Fig. AF), then adjust the side tilting angle (10). When the adjustment is completed, tighten the screws (11) and (12).

9.Perform step 1 again.

Side broom side position adjustment

10.The purpose of this adjustment is to improve the side position of the brooms as to the suction inlet (17, Fig. G).

11.To perform the adjustment, loosen/tighten the self-locking nuts (1 and/or 2, Fig. AG), thus changing the side position of the brooms. To have a optimum adjustment, the arms must be slightly tensioned outwards.

12.When the side brooms are too worn out, the adjustment is not possible; replace the brooms according to the instructions in the relevant paragraph.

3RD BROOM POSITION CHECK AND ADJUSTMENT

NOTE

Brooms of various hardness are available. This procedure is applicable to all types of brooms.

3rd broom position check

1.Check the 3rd broom for proper height and tilting, according to the following procedure:

Drive the machine on a level ground.

Start the machine and bring the 3rd broom arm (1, Fig. AH) straight in front of the cab (as shown in the figure) according to the procedure shown in the relevant paragraph.

Turn the 3rd broom tilting switch (22, Fig. D) to neutral position.

Keeping the machine stationary, lower the 3rd broom completely (2, Fig. AH) and allow it to rotate for a few seconds.

Stop and lift the 3rd broom, then move the machine.

Check that the size and orientation of the print left by the 3rd broom is as follows:

The broom must touch the ground along a circle arc ranging from “10 o’clock” position to “2 o’clock” position (3, Fig. AH).

The broom forward tilting angle (4, Fig. AH) must be 10 degrees approximately.

If necessary, adjust the broom according to the following procedure.

2.Engage the parking brake (13, Fig. E).

3.Turn off the engine, by turning the ignition key (24, Fig. D) counterclockwise, to the end of stroke, then remove it.

3rd broom height adjustment

4.Operate on the tensioning self-locking nut (5, Fig. AI) of the spring (6) and consider the following:

To lower the broom, the nut (5) must be unscrewed;

To lift the broom, the nut (5) must be screwed.

5.Perform step 1 again.

3rd broom forward tilting angle (4, Fig. AH) adjustment

6.Loosen the locknuts (7 and 8, Fig. AI), then adjust the forward tilting angle (4) by placing a lever in the hole (10) and turning the tie rod (9).

7.When the adjustment is completed, tighten the locknuts (7) and (8).

8.Perform step 1 again.

9.When the broom is too worn out the adjustment is no more possible; replace the broom according to the instructions in the relevant paragraph.

40

33014091(3)2008-02 A

RS 1300

Page 162
Image 162
Nilfisk-ALTO RS 1300 manuel dutilisation 3RD Broom Position Check and Adjustment

RS 1300 specifications

Nilfisk-ALTO RS 1300 is a leading pressure washer renowned for its powerful performance and versatile applications. Designed for both commercial and residential use, this model caters to a wide range of cleaning needs, including patios, driveways, vehicles, and garden furniture.

One of the standout features of the RS 1300 is its robust motor, which delivers an impressive pressure of up to 130 bar. This high pressure allows users to tackle stubborn dirt and grime with ease. Coupled with a flow rate of up to 500 liters per hour, the machine ensures efficient cleaning in a shorter time frame.

The RS 1300 is equipped with a highly durable aluminum pump system that not only enhances the lifespan of the unit but also ensures consistent performance during heavy-duty cleaning tasks. The innovative design includes an adjustable pressure nozzle, which offers flexibility for various cleaning applications. Users can easily switch between different spray settings, allowing for tailored cleaning experiences.

In addition to its powerful performance, the Nilfisk-ALTO RS 1300 features a built-in detergent tank, making it convenient to use cleaning agents for enhanced results. This integration simplifies the cleaning process, as users can apply soap directly through the spray gun, boosting efficiency when dealing with tough stains.

Safety and ease of use are paramount in the design of the RS 1300. The machine comes with a safety lock feature to prevent accidental starts, providing peace of mind during storage and transport. Its ergonomic design ensures a comfortable grip, reducing user fatigue during prolonged use.

The RS 1300 is easy to transport, thanks to its lightweight design and integrated wheels. Users can effortlessly maneuver the unit around their property or job site. Additionally, storage is made simple with practical onboard storage solutions for the hose and accessories.

Overall, the Nilfisk-ALTO RS 1300 stands out for its combination of power, convenience, and user-friendly features. With its advanced technology and robust construction, it is a reliable choice for anyone seeking a high-performance pressure washer to tackle their cleaning challenges effectively. Whether for professional or home use, the RS 1300 is designed to meet the rigorous demands of various cleaning applications.