WX/Alert Indicator — shows the CB is ready to receive a weather alert signal.
RX/TX Indicator — shows whether the CB is transmitting or receiving.
S/RF/SWR/CAL Switch — lets you quickly select the display for the RF/sig- nal meter (radio input/output signal pow- er strength, standing wave ratio of the antenna, or SWR calibration).
Universal Mounting Bracket — lets you mount your CB securely in your ve- hicle or on a desk or table in your home.
Note: To use this CB, you need a mobile or base station antenna. Your local Ra- dioShack store has a wide variety of an- tennas. For more information, see “Installing an Antenna” on Page 6.
We recommend you record your CB’s serial number here. The number is on the CB’s back panel.
Serial Number___________
FCC INFORMATION
The Federal Communications Commis- sion (FCC) does not require you to have a license to operate this CB. However, the FCC does require that you read and know Part 95 of FCC Rules. These rules apply to the operation of a Class D CB. We have provided a copy of these regu- lations with your CB.
Warning: Do not open your CB to make any internal adjustments. Any internal adjustments can be made only by an au- thorized service technician.
Internal adjustments and/or modifica- tions can lead to illegal operation as de- fined by Part 95 of FCC Rules. Such illegal operation can lead to very serious consequences.
To be safe and sure:
•Never open your CB’s case.
•Never modify your CB.
Your CB might cause TV or radio inter- ference even when it is operating prop- erly. To determine whether your CB is causing the interference, turn off your CB. If the interference goes away, your CB is causing it. Try to eliminate the in- terference by:
•Moving your CB away from the receiver
•Contacting your local RadioShack store for help
If you cannot eliminate the interference, the FCC requires that you stop using your CB.
3
