Samsung TX-N2668WH A-IN terminal on, RF A/B switch, Switch and the VHF/UHF, Terminal on the rear

I N S TA L L AT I O N

4

Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.

Incoming

Cable

Splitter	RF (A/B)
	Switch
	Cable Box

5

Connect another cable
between the other OUT
terminal on the splitter	Incoming
and the A–IN terminal on	Cable
	Splitter	RF (A/B)
the RF (A/B) switch.
		Switch
		Cable Box

6

Connect the last coaxial
cable between the OUT
terminal on the RF (A/B)	Incoming
switch and the VHF/UHF	Cable
	Splitter	RF (A/B)	TV Rear
terminal on the rear of the
	Cable Box	Switch
TV.

After you’ve made this connection, set the A/B switch to the “A” position for normal view- ing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

14