13
INSTALLATION
Connecting to a Cable Box that Descrambles All Channels
1
Find the cable that is con-
nected to the ANTENNA
OUTterm inal on your cable
box.
This terminal might be labeled
“ANTOUT”, “VHF OUT” or simply,
“OUT”.
2
Connect the other end of
this cable to the VHF/UHF
antenna terminal on the
back of the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow theinstructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths ofcoaxial cable. (These items are available at most electronics stores.)
1
Find and disconnect the
cable that is con nected to
the ANTENNAIN
terminal on your cable box.
This terminal might be labeled
ANTIN, VHF INor simply,
IN.
2
Connect this cab le to a
two-way splitter.
3
Connect a coaxial cable
between an OUTPUT term i-
nal on the splitter and the
INterminal on the cable
box.
Incoming Cable
Splitter
Incoming Cable
Cable Box
Splitter
AA03382A-00_SEA/SECA_ENG 3/10/04 2:29 PM Page 13