14
INSTALLATION
4
Connect a coaxial cable
between the ANTENN A
OUTterm inal on the cable
box and the B–INterminal
on the RF(A/B) switch.
5
Connect another cab le
between the ot her OUT ter-
minal on the splitter and
the A–IN terminal on the
RF (A/B) switch.
6
Connect the last coaxial
cable between the OUT
terminal on the RF (A/B)
switch and the VHF/UHF
terminal on the rear of the
TV.
After you’ve made this connection, set the A/B switch to the “A” position for normal view-ing. Set the A/B switch to the “B” position to view scrambled channels. (When you set theA/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which isusually channel 3 or 4.)
Incoming
Cable
Cable Box
RF (A/B)
Switch
Splitter
Incoming
Cable
Cable Box
RF (A/B)
Switch
Splitter
Incoming
Cable
Cable Box
RF (A/B)
Switch TVRear
Splitter
AA03382A-00_SEA/SECA_ENG 3/10/04 2:29 PM Page 14