Network Camera (Wired LAN) Settings
7MAC ADDRESS display
This shows the Mac address for the camera.
Note:
•Up to a maximum of 16 individual users can access a single camera on the network at the same time. However, only one user out of this maximum of 16 users can be accessing at Operator or Administrator level at any one time.
•Depending on the network environment, it may not be possible for 16 users to be connected to a camera at the same time. Once a user has accessed a camera, the network may not allow further accesses, so if this happens, change the resolution for the transferred data (by reducing it) or change the compression ratio (by increasing it) to reduce the volume of data being transferred.
•If a 17th user tries to access a camera, the message “THE UNIT IS BUSY!” will be displayed on their screen. Depending on the network environment, the message “THE UNIT IS BUSY!” may be displayed on a user’s computer screen even when less than 16 users are accessing a camera.
Changing a password
Example: To change the password for the Administrator level (ID3) to “1234”
Passwords can consist of between 4 and 8 numerals.
☞Delete the current password
(“3333”) in the password column for ID3, type “1234” as the new password for ID3, and then click the [SET] button.
The following window will be displayed.
Check that the details are correct, and then close the window.
•If a user at Administrator level accesses a camera while a user at Operator level is accessing the camera, the Administrator level user will have priority. In such cases, the Operator level user will be disconnected and the message “THE UNIT IS DISCONNECTED!” will be displayed on their screen.
•If an Operator or Administrator attempts to access the camera while another user with the same access level is accessing the camera, the second access will have priority. In such cases, the first access will be disconnected, and the message “THE AUTHORIZED USER LOGGED IN!” will be displayed on that user’s computer screen.
•Depending on the network environment, the speed of data transmission to users may drop if the number of users accessing the same camera increases, and operations such as refreshing of images may become delayed.
(When a password has been changed)
When the camera and the computer are connected once more, the network password entry screen will be displayed, so check the username and type in the new password (“1234”) in the password column for ID3.
English | – 21 – |
