Name and Function of Each Part
I
|
|
| PC CARD |
| MONITOR | ETHERNET | H |
8 | OUT | ||
|
|
|
G
D/N IN COM AC24V
PC
POWER 1 | 2 |
MODEM | DC12V |
ALARM IN OUT |
GND
CLASS 2 WIRING
J 9 F
8Link indicator
This indicator illuminates when the camera is connected to a network. It flashes while data transmission is in progress.
The indicator switches off when the camera is connected to a wireless LAN.
9Alarm/D/N (Day/Night) terminals
D/N IN COM
B
C
A
D
ALARM IN OUT
AALARM IN terminal (IN)
Connect this terminal to an infrared sensor or similar use in external detection of intruders.
BD/N IN terminal (D/N IN)
This can only be used when COLOR mode is set. A device such as an infrared sensor can be used to automatically switch between color images and black & white images.
CALARM OUT terminal (OUT)
Connect this terminal to a buzzer or lamp that is used to warn when an alarm is detected by means of motion sensor or alarm input. In addition, when the day/night function (COLOR mode or TIMER mode) is being used, an IR lamp or other device can be made to illuminate when monitoring switches to black & white images. (Output rating: 18 V, 25 mA)
DGround terminal (COM)
FPower supply input terminals (AC24V, DC12V, GND)
GRS-232C connector
Use this connector to connect the camera to a modem for transmission of data along telephone lines, or for connecting the camera to a computer.
Use the PC/MODEM select switch to change the camera operation between modem and computer operation.
HETHERNET connector
Use this connector to connect the camera directly to a computer or to a network. Use a
ILens iris output connector
Connect this connector
JPC/MODEM select switch
Use this switch to set the function of the
Note:
•Make sure that the camera’s power is turned off before setting the function of the
•Using the
– 6 – | English |
