CAMERA Settings
6ELECTRONIC SHUTTER
This setting is used when IRIS is set to automatic iris.
Setting range: 1/60 (default setting), 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
7BLC (backlight compensation)
Available settings:
•OFF (default setting): Backlight compensation is not carried out.
•MULTI (multiple point photometry): Backlight compensation is calculated from the whole image to obtain correct images.
•CENTER (center focus photometry): Backlight compensation is calculated based on the center of the image to obtain correct images.
8WHITE BALANCE
Available settings:
•AUTO (automatic white balance)(default setting): The white balance is adjusted automatically to obtain correct colors even if the light source changes.
•INDOOR: This setting is for when the camera is being used indoors under fluorescent lighting.
•OUTDOOR: This setting is for when the camera is being used outdoors under natural sunlight.
•MANUAL (manual white balance): This lets you make manual fine adjustments to the white balance. When “MANUAL” is selected, you can adjust the red and blue colors. It can be used when the “AUTO” setting does not give correct color reproduction.
☞Setting manual white balance (MANUAL)
Click the 
and 
buttons repeatedly to adjust the settings for R (red) and B (blue).
Setting range: 0 to 255
Note: The red or blue component becomes stronger when the setting is higher.
9GAMMA
Select a value that is suitable for the monitor being used.
Setting range: 1, 0.8, 0.6, 0.45 (default setting), 0.3
FAPERTURE
Set to “HIGH” if you would like the contours of the objects in the images to be emphasized. (Available settings: NORMAL, HIGH)
GCONTRAST
Available settings:
•NORMAL: When mainly viewing dark places
•HIGH: When mainly viewing bright places
HDAY/NIGHT, AGC gain
Click the [DETAIL] button to change the DAY/NIGHT and AGC Gain settings. The “DAY/NIGHT SET” screen will be displayed and detailed settings can be made in this screen. (p. 27)
I[PRESET] button
Click this button to return all settings to their factory defaults. A dialog box will be displayed. Click the [OK] button to return the values to their factory defaults.
– 26 – | English |
