WIRELESS LAN SET Settings
Make the wireless LAN settings in the following order.
1 Camera wired LAN settings (TCP/IP settings)
Make sure that the settings in “Network Camera Settings” (p. 15) have been carried out.
2 Wireless LAN device settings (TCP/IP settings)
Refer to the documentation that is provided with the wireless LAN device for details. The ESS ID, transmission mode and WEP (encipherment) settings are necessary in order to complete the camera’s wireless LAN settings. Take note of the settings made.
3 Camera wireless LAN settings (TCP/IP settings)
• Use the same ESS ID, transmission mode and WEP (encipherment) settings for the camera’s wireless LAN settings as were made for the wireless LAN device. (p. 52)
Insert the wireless LAN card into the camera (Figure 1)
(1)Insert a
This will lock the card in place.
(2)To remove the card, push the knob in the direction of the arrow to release the card.
Note:
•Consult your local dealer for advice on purchasing a wireless LAN card.
•When a wireless LAN card as been inserted into the network camera, the camera should be used in an ambient temperature that does not exceed 40°C.
Computer
Camera
Computer | Access point | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Computer
Camera
Figure 1
Computer | Access point |
4 Wireless LAN device settings (TCP/IP settings)
When the settings have been completed, the images from the camera will be transmitted via the wireless LAN device and can be viewed on the computer as live images.
Camera
English | – 51 – |
