Sanyo VCC-WB4000P instruction manual External Alarm Sensor and Motion Detector Settings

Set “ALARM OUT”, “ALARM OUT MODE”,

“ALARM OUT TIME”, “ALARM SOUND MODE” and “ALARM BUFFERING” in the same way as for “External Alarm Sensor Setting”.

Alarm Settings

External Alarm Sensor and Motion Detector Settings

1 Set “ALARM REC USE” to “NO USE” (example).

2 Set “EXTERNAL ALARM” to “NO” (example).

3 Set “MOTION DETECTOR” to “ON”.

The motion detector level and MOTION

DETECTOR SET screen will be displayed.

1

2

3

4 Use the drop-down list box to change the “MOTION DETECTOR LEVEL” setting (example: “2”).

The smaller the value selected, the higher will be the sensitivity. Refer to “Motion Detector Level Sensitivity Setting” for further details. (p. 38)

5 Set the sensor marks.

Refer to “MOTION DETECTOR SET Settings”.

6 Set “ALARM MODE” to “OR” (example).

An alarm will then be triggered if either the motion detector or the external alarm sensor detects something. Refer to “5 ALARM MODE” for details. (p. 33)

7 Click the [SET] button.

8

English – 37 –