Network Camera (Wired LAN) Settings

1 Installation of Plug-in Software to the Computer

Install the plug-in software (on the setup CD-ROM) onto the computer that is to be used. Installing the plug-in software makes it possible to view live images from network cameras using the computer’s web browser.

1 Turn on the power for the computer.

After Windows has loaded, continue to the next step.

2 Insert the setup CD-ROM into the CD-ROM drive of the computer.

3 Click “Start” and then click “Run”.

4 Type “D:\Setup.exe”.

Type the drive letter for the CD-ROM drive of the computer in place of “D”.

5 Click the [OK] button.

After a short wait, the installation window will appear.

Note: Simply answer the prompts that appear on the screen in order to continue installing the software. The installation program has been set up beforehand to install the software correctly.

6

7

Click the [Next] button.

Read the license agreement, and select “I accept the terms in the license agreement” if you agree to the terms of the license. Then click the [Next] button.

– 12 –

English

Page 13
Image 13
Sanyo VCC-WB4000P Network Camera Wired LAN Settings, Installation of Plug-in Software to the Computer, Click the OK button