Playing Back Alarm Data
Alarm detection data (when an external sensor or motion detector have been set) and alarm image data is automatically recorded. Moreover, this data is also played back in the live image screen.
Playing Back Alarm Data in the Camera’s Internal Memory
1 Click the ALARM DATA indicator (while it is green or red).
The ALARM DATA LIST screen will be displayed, and an alarm image will be displayed as a still image in the PREVIEW screen.
2 Click the [PLAY] button.
The BUFFER DATA VIEW screen will be displayed (the PRE or POST indicator will illuminate) and playback of the alarm images will start. When playback is finished, the [POST] indicator will change to [END].
3 Click the [LIVE VIEW] menu select button.
The screen will return to the live image screen.
Descriptions of Alarm Operation Buttons
1 2 3 4
5 6 7
1[TOP] button
Playback returns to the beginning of the alarm data that is being played back and then waits in playback standby. You can then click the [PLAY] button to play back the data.
2[PLAY] button
Click this button during playback standby or when playback is paused to start playback.
3[STOP] button
If you click this button while playback is in progress, playback will stop.
4FRAME RATE
You can select the playback speed for alarm images using the
Available settings: BASIC, MID, HIGH
Note: The actual playback speed will vary depending on the alarm data volume and the network status.
5[DOWNLOAD] button
Use this button to store alarm data on the computer.
6PRE/POST/END indicators
When alarm data is played back, this automatically appears as [PRE] (during
7[LIST] button
Click this button to switch to the ALARM DATA LIST screen.
English | – 45 – |
